Proto Labs, Inc. (PRLB) 2026 Q3 法說會逐字稿

Greetings. Welcome to the Proto Labs Q3 fiscal year 2026 earnings conference call. At this time, all participants are in a listen-only mode.( Operators Instructions )

I will now turn the conference over to Ryan Johnsrud, Investor Relations.

Thank you, Ryan. You may begin.

Thank you. Good morning, everyone, and welcome to Protolabs' third quarter 2026 earnings conference call.

I'm joined today by Suresh Krishna, President and Chief Executive Officer and Dan Schumacher, Chief Financial Officer.

This morning, Proto Labs issued a press release announcing its financial results for the third quarter ended September 30, 2026.

The release is available on the company's website.

In addition, a prepared slide presentation is available online at the web address provided in our press release.

Our discussion today will include statements relating to future performance and expectations that are or may be considered forward-looking statements and subject to many risks and uncertainties that could cause actual results to differ materially from expectations.

Please refer to our earnings press release and recent SEC filings, including our annual report on Form 10-K, for information on certain risks that could cause actual outcomes to differ materially and adversely from any forward-looking statements made today.

The results and guidance we will discuss include non-GAAP financial measures, consistent with our past practice.

Please refer to our press release and the accompanying slide presentation at the Investor Relations section of our company website for a complete reconciliation of GAAP to non-GAAP results.

Now, I will turn the call over to Suresh Krishna. Suresh.

Thank you, Ryan.

Good morning, everyone, and thank you for joining our earnings call.

I am very pleased with our third quarter performance. Which provides further evidence that the execution of our strategy is translating into strong and consistent financial results.

Third quarter revenue grew 14% resulting in another record revenue quarter.

This is the fourth consecutive quarter of double-digit growth.

We also delivered double-digit non-GAAP EPS growth for the fourth consecutive quarter with EPS growth outpacing revenue growth in each of these quarters.

In the first nine months of 2026, year-over-year revenue grew 12%, adjusted operating margin expanded 300 basis points and adjusted EPS grew 46%, underscoring the consistency of our execution and the strength of our momentum.

These results are driven by the tremendous work of our Protolabs team and their continued commitment to serving our customers. I want to thank them all. For everything they do every day.

The trends that drove strong performance in the first half of the year continued in the third quarter.

Larger strategic customers continue to broaden their relationships with Proto Labs and turn to us for more of their manufacturing needs across the entire product life cycle.

This is reflected in a 17% year-over-year increase in revenue per customer.

In addition, we served almost 21,000 customers in the quarter, up sequentially for the third straight quarter.

We continue to see strong demand in high-growth industries, including aerospace, defense, drones, robotics and data centers.

We work with most innovative companies in these markets, including Blue Origin, Relativity Space, Raytheon, AeroVironment, Shield AI, Agility Robotics and many others.

These customers need to rapidly move from ideas to prototypes and into production, making Proto Labs speed, quality and reliability increasingly critical.

We saw broad-based strength across our business in the third quarter with each of our three largest service lines growing double-digits year-over-year.

Factory CNC machining was particularly strong, growing 22% as our world-class feed continues to resonate with customers.

Global 3D printing revenues grew 12%, led by strong demand from metals and HP's multi-jet fusion technology or MJF.

Year-to-date, MJF revenue in our U.S. Factory operation is up more than 40%, and we are investing in additional capacity to support that growth.

Protolabs is at the center of a major shift taking place in manufacturing driven by four powerful macro trends.

First, reindustrialization. Companies are bringing manufacturing closer to their customers and building more resilient, regional, and sovereign supply chains.

Second, a wave of hardware innovation moving at the speed of software. Investment is accelerating across critical and emerging industries like space, drones, robotics, data centers and other highly engineered hardware that ultimately needs to be designed, tested and manufactured from prototype to production at faster speeds than ever before.

Third, physical AI.

AI is moving beyond software and into the physical world, driving a new generation of robotics, autonomous systems, intelligent machines, and other advanced products that require manufacturing to leverage physical AI and fourth, supply chain agility and scalability as innovation accelerates. Companies need manufacturing partners that can invest and scale with them without the manpower and capital constraints of traditional supply chains.

This is exactly the environment Protolabs is built for.

We help customers move quickly from idea to prototype to production while delivering the quality, reliability and scalable capacity they need.

And we have an important structural advantage. Our true digital spread.

Protolab's software-native digital manufacturing model enables speed and automation today while creating a foundation to leverage AI and scale efficiently over time.

And with millions of CAD files and decades of manufacturing data in our library, we have a powerful foundation to apply AI, advance our manufacturing capabilities and create more valuable solutions for our customers.

We are already seeing the benefits of these trends in our business and we believe they create a significant opportunity for Protolabs over the next several years.

We continue to invest in capabilities to capture the opportunity ahead.

We are advancing our four strategic pillars, elevating the customer experience, accelerating innovation, expanding into production and driving operational efficiency.

I'd like to share several important business and product upgrades with you now.

On ProDesk, we launched new metal 3D printing heat treatments, FDM printing capabilities, and additional CNC machining surface finishes, giving customers more control over part performance, surface quality, and finishing requirements.

Next, we continue to enhance the Protolabs network with improvements designed to accelerate. Order acceptance, improve partner communication, and strengthen quality.

We are also developing AI-assisted order checks to identify specification discrepancies earlier and further automate the customer and partner experience.

With respect to improving efficiency across the organization, last week we announced an enterprise implementation of Amazon Quick as part of our broader AI roadmap.

Our initial focus is on go-to-market workflows, where we believe AI can improve productivity, reduce response times, and streamline order-to-quote processing.

To accelerate implementation, we created forward-deployed AI engineer roles to identify high-impact use cases and design AI-enabled workflows across the organization. Enterprise-wide implementation will continue into 2027, led by Mark Kermisch, our Chief Technology and AI Officer.

Technology is an important enabler of our strategy and operational execution is the other.

In August, Sam Ramahi was named Chief Operations Officer. Sam brings over 25 years of executive operational leadership across global companies like Nvent, Eaton, H1ywell and more.

Sam will help advance our strategic pillars while focusing on driving operational excellence across safety, quality, delivery and cost.

We are also expanding the talent and capabilities needed to execute our strategy.

We have officially inaugurated our new global capability center in India.

Engineers are on site and are working directly on our manufacturing and AI roadmap.

The talent and capabilities we are building in India will help accelerate progress across all four strategic pillars. The Strength Center strengthens our investments in technologies that will meaningfully improve productivity, including AI, automation and advanced manufacturing capabilities that support our broader digital manufacturing strategy.

Turning to Europe, revenue grew double-digits in the third quarter, in part due to the go-to-market changes we initiated late last year.

We are very pleased with this performance and I want to thank our team in Europe led by Piotr Horowitz for their continued execution and commitment.

We continue to advance the initiatives needed to return Europe to profitability, addressing the drivers of underperformance while putting the right organizational structure, operating model, talent and capabilities in place to execute more effectively.

These efforts are designed to complement the go-to-market changes already under way and support further operational improvements.

As I shared last quarter, the transformation in Europe remains a work in progress and it's a longer-term effort.

While we are increased by double-digit revenue growth, our objective remains unchanged, transform Europe into a contributor to both future growth and profitability.

Before I turn the call over to Dan, I want to highlight two recent recognitions of our commitment to manufacturing innovation.

In August, we announced a partnership with MIT and a grant supporting U.S. Manufacturing innovation research at MIT Industrial Performance Center.

And in September, Proto Labs was one of the only 500 U.S. Companies named to Business Insiders America's Most Innovative Businesses 2027 list.

We are proud of both recognitions and believe they reinforce Protolabs' position at the center of manufacturing innovation.

In closing, I am very pleased with our results through the first nine months of the year and the progress we are making on our transformation.

At the same time, I believe we are still in the early innings of what this business can achieve.

We are executing our strategy at a time when some of the world's most innovative industries are moving faster, manufacturing supply chains are being reconfigured, and speed and digital manufacturing capabilities have never been more important.

We believe Protolabs is uniquely positioned for this environment and the opportunity ahead.

We remain focused on building on recent momentum and delivering sustained profitable growth and long-term value for our customers and shareholders. With that, I'll turn the call over to Dan to walk through the financials and outlook.

Thanks, Suresh, and good morning.

I'll start with an overview of our third quarter results, followed by our outlook for the fourth quarter.

Third quarter revenue was a company record $154.3 million, up 14.2% year-over-year in constant currencies.

U.S. Revenue grew 14.7%, while Europe grew 12.2% in constant currencies.

Third quarter CNC machining revenue grew 16.7% year-over-year in constant currencies.

Our largest service continues to see very strong demand in aerospace and defense, most notably space exploration, satellites and drones, as well as in robotics.

Injection molding grew 12.6% in constant currencies, driven by strength in electronics, aerospace and defense, and telecommunications.

3D printing revenue increased 11.5% year-over-year in constant currencies.

As we saw in the first half of 2026, demand in DMLS and MJF remained very strong in the U.S.

We continue to invest capital to expand capacity in those areas.

Sheet metal revenue declined 4.6% year-over-year in constant currencies with broad weakness across end markets. Partially offset by strength in aerospace and defense.

On to profitability, non-GAAP gross margin was 44.5% in the third quarter, down 230 basis points sequentially and 140 basis points year-over-year.

The lower gross margin was driven by our factory operations, primarily reflecting higher raw material costs, machine upgrades.

And targeted near-term investments in labor and contractor support.

These were made to accommodate the significant increase in volume over the course of the year, while maintaining our standards for speed, quality and reliability.

Third quarter non-GAAP operating expenses were $50.3 million, up $1.7 million compared to the prior year. Primarily reflecting increased investment in demand generation, along with higher contractor, professional services, and software license costs as we continue to fund our strategic priorities.

Importantly, we continue to generate significant operating leverage.

Adjusted operating expenses were 32.6% of revenue, down from 34.8% of revenue in the second quarter and 35.9% in the third quarter of 2025.

This operating leverage reflects both strong revenue growth and the targeted actions we have taken to improve our cost structure and reallocate resources towards our highest priority growth initiatives.

We continue to invest and add resources behind our strategic initiatives while identifying additional efficiencies that can help fund future growth.

Adjusted EBITDA was $26.2 million or 17% of revenue, up from $21.1 million or 15.6% of revenue in the third quarter of 2025.

Year-to-date, adjusted EBITDA is up 27.2% year-over-year.

Third quarter non-GAAP earnings per share were $0.63, up 33.4% year-over-year, driven by revenue growth, mix shift and significant leverage on our SG&A expenses.

$0.63 is the highest adjusted EPS figure we've reported since the third quarter of 2020.

Adjusted EPS is up 45.5% year-over-year-to-date.

We generated $22.8 million in cash from operations during the third quarter, and we repurchased $5 million of common stock.

On September 30, we had $175 million of cash and investments on our balance sheet and zero debt.

Our outlook for the fourth quarter of 2026 is outlined on slide 14.

For the fourth quarter, we expect revenue between $143 million and $151 million. At the midpoint, this implies 8% revenue growth year over year.

As a result, we are raising our full year 2026 revenue growth outlook from a prior range of 8% to 10% to a new range of 10% to 11%. We anticipate 2026 will be our 1st year of double-digit organic revenue growth since 2018.

We expect foreign currency to have a negligible impact on revenue compared to the fourth quarter of 2025.

Our fourth quarter earnings guidance incorporates the following assumptions: non-GAAP add-backs will include stock-based compensation expense of approximately $4.1 million and amortization expense of $900,000, a non-GAAP effective tax rate between 19% and 21%.

In summary, we expect fourth quarter 2026 non-GAAP earnings per share between $0.46 and $0.54. That concludes our prepared remarks. Nicole, please open the line for questions.

( Operators Instructions )

Our first question comes from Brian Drabb with William Blair. Please go ahead.

Morning. Thanks for taking my questions and congrats on a great quarter.

Thanks, Don. Could you just start by talking about, it looks like revenue per customer is up about 17%.

Maybe add some granularity to that in terms of is it driven by volume or is it also the breadth of services now that you're increasingly offering that's allowing for that?

That's just a very impressive result. And where are you seeing the most success?

Hey, Brian, this is Turesh. Thanks for your question.

As we've talked before, we are absolutely focused on our four key strategic pillars, the first of them, which is elevating customer experience and the second of them, which is accelerating innovation on behalf of the customers and the third, which is expanding into production are all contributing to this particular growth that we are seeing in wallet share with our core customer base.

Some of the changes we've made to be able to do this well beyond the strategies, the way we are executing, we have an enterprise sales team, we are focused on a handful of industries that are high value for us and those sales teams are building deep customer relationships and listening and turning it around to provide innovation that is specific to these customers in the past, we may have innovated.

For the general customer base, which for us is tens of thousands of customers, to now being very focused on the customers where we see high value. So that is where we are able to drive wallet share and increase revenue per customer.

And then I'm seeing the stock, I'm surprised a little bit to see that the stocks indicating slightly down before they open here.

It could be just, the guidance for, midpoint of guidance is $0.50 for a fourth quarter after you just put up $0.63. But is there, what is there beyond just typical seasonality for the fourth quarter that you're looking at as you guide for that fourth quarter?

Yeah, I mean, one, it is, typical.

I assume the seasonality that we've seen for the prior seven years for last quarter. So it is built in there that we expect to see some softness around the holiday time, which, as impacts that EPS number.

Second, gross margin I'm assuming to be flat to slightly down quarter over quarter.

We don't expect to see the same.

We talked about machine upgrade costs and so forth. We don't expect to see it at that high of a level, but as we have lower revenue and we have some inefficiency in our factories around the holiday time as we bring in contractors and overtime as employees are taking time off. And then I would expect SG&A expenses as a percent of revenue to look more like the first and second quarter.

Of the year rather than what we saw in the third quarter. So there is a pickup in SG&A expenses as well.

Got it. Okay. All right. I'll get back in line. I might have a couple more. Thanks.

Sounds good.

( Operators Instructions )

Our next question comes from Austin Bullitt with Needham. Please proceed with your question.

Hey, guys. Thanks for taking my question, and congrats on the great results.

I was just hoping to get a little bit more color on kind of the growth you're seeing in the factory versus the network. I didn't see what the revenue for the network was, if you could provide that.

Yeah, so network revenue was up 3% year over year.

So that meant that factory growth was.

Up 17.5%. So again, we had higher growth in the factory than we had in the network.

From a network side, we are seeing really strong momentum in the network in Europe, but things are a bit softer in the US. Our customers, as we come to them.

They have a choice in this time in terms of do they need the speed that we're offering through the factory or do they need the breadth of services and maybe longer lead time of the network and we are just seeing more of our customers in the US to take advantage of that speed and you're seeing that in the tremendous growth.

Got it.

And then just one follow-up. So with all the defense or A&D success more broadly, like with your conversations with your customers, how are you guys feeling just with like some uncertainty around the fiscal '27 budget continuing resolution continuing through 2027? Do you guys think that like this momentum can continue even with some kind of lingering uncertainty around future budgets?

Yeah, Austin, thanks for bringing that up.

We are very broad-based in terms of the industry we serve, and A&D for us is very broad as well.

While there might be some uncertainty around defense budget, we see tremendous opportunity in space exploration, in satellites, in drones, neo primes, along with the primes.

And then beyond that, we absolutely see non-A&D sectors like robotics and data centers also growing. So we are very confident that when you look out into the future that we would continue to be able to drive our goal of double-digit growth for the foreseeable future.

All right. Well, keep up the great work, guys. Thanks for taking my questions.

Thank you.

Our next question is from Brian Drabb with William Blair. Please go ahead.

Oh, thanks. I was just wondering if you could talk maybe for Dan a little bit further out in terms of how you're thinking about the trajectory of gross margin.

And expense dollars as we think about 2027, maybe just directionally or high level of different projects and different expenses to think about it as we're modeling.

Yeah.

So we're in the middle of establishing our 2027 budget and plans as we speak.

But what I would tell you is. We're going to continue to accelerate our investment in several areas.

One is expanding our capacity. And the second is investing in our strategic pillars. So that's elevating our customer experience, accelerating innovation, expanding into production, and driving operational efficiency. So with the last one, our objective from a spending perspective is really to focus on how do we continue to increase our efficiencies.

As we invest.

I would expect next year from an operating expense perspective that the growth in operating expenses would be much closer to the revenue growth next year than what we saw this year as we start to make these investments.

From a gross margin perspective, it really is going to depend on the mix that we're seeing and the different types of products that we have.

And how that plays out as we go through the year.

But I would expect that we would be able to hold our gross margin percentage as we go into 2027.

Okay.

Okay.

I got it.

I think I'll follow-up more later on that, but that's really clear. Thanks, Dan.

Yes.

Our next question comes from Greg Palm with Craig Hallam. Please proceed with your question.

Yeah, thanks.

Sorry if this got, I guess, maybe explained or specified. I've been juggling a handful of calls this morning, but in terms of maybe the sequential gross margin bridge from Q3 to Q2, a couple hundred basis points, give or take.

Dan, I know you listed a bunch of reasons, but just can you break that out between them and then just in terms of sustainability or confidence in getting that gross margin level back up from here, maybe just a little bit more color on that, please?

Just to be clear, Greg, you're talking about Q2 to Q3 gross margin?

Correct.

All right.

Greg, as you noted in our prepared remarks, demand has been exceptionally strong in our U.S. Factory C&C revenues have grown over 20% for six quarters in a row, so while our automated model is designed to scale efficiently with this kind of volume increase.

We in this particular quarter had to do some machine upgrades, we found opportunistically a window where we could do that and some of our order machines were upgraded so that they could start to perform at the same rate as some of the newer machines that we have acquired more recently, we have acquired over 40 new machines this past year. So those expenses were incurred within the quarter and not capitalized and then there was some.

Some contract labor we had to bring in for our support services because we were chasing this growth and make sure that we could deliver everything we needed for our customers within the time frames that we provide them.

Beyond that, there was raw material increases that we saw.

So those are the pressures that we got in Q3 versus our Q2 performance.

To provide more specifics, I would say there's about 100 basis points in those machine upgrades. There's probably about 90 basis points in that contract labor and the remaining in the material costs.

I just want to re-emphasize the contract upgrades and obviously the contract labor, those are all variable costs that we can choose to move over time. And it's really focused on making sure that we have the speed.

The quality and reliability for our customers.

So just to be clear though, so to some of that, I mean, you incur that completely in Q3 and then it goes away completely for sort of Q4 go forward or?

Yeah, well, one thing I would say is we're always using contract labor, right, to vary depending on the volume that's coming in. But yeah, there is some assumption in the guide that that cost comes down as we're in fourth quarter. But what is kind of counteracting that, right, is the lower volume that is in the middle of the guide as well as seasonality. So we may have to use some of that contract labor and some of that overtime as our employees take off with us. Holidays.

Yeah, understood. Okay, appreciate the call.

Once again, if you would like to ask a question, please press star one on your telephone keypad. And it looks like we have no more questions in the queue. This now concludes our question-and-answer session. Ladies and gentlemen, thank you for your participation. This concludes today's teleconference. Please disconnect your lines and have a wonderful day.

Greetings. Welcome to the Proto Labs Q3 Fiscal Year 2026 Earnings Conference Call.

( Operators Instructions ) I will now turn the conference over to Ryan Johnsrude, Investor Relations.

Thank you, Ryan.

Thank you. Good morning, everyone, and welcome to Protolabs' third quarter 2026 earnings conference call.

I'm joined today by Suresh Krishna, President and Chief Executive Officer and Dan Schumacher, Chief Financial Officer.

This morning, Protolabs issued a press release announcing its financial results for the third quarter ended September 30, 2026.

The release is available on the company's website.

In addition, a prepared slide presentation is available online at the web address provided in our press release.

Our discussion today will include statements relating to future performance and expectations that are or may be considered forward-looking statements and subject to many risks and uncertainties that could cause actual results to differ materially from expectations.

Please refer to our earnings press release and recent SEC filings, including our annual report on Form 10-K for information on certain risks that could cause actual outcomes to differ materially and adversely from any forward-looking statements made today.

The results and guidance we will discuss include non-GAAP financial measures, consistent with our past practice.

Please refer to our press release and the accompanying slide presentation at the Investor Relations section of our company website for a complete reconciliation of GAAP to non-GAAP results. Now, I will turn the call over to Suresh Krishna. Suresh.

Thank you, Ryan.

Good morning, everyone, and thank you for joining our earnings call.

I am very pleased with our third quarter performance. Which provides further evidence that the execution of our strategy is translating into strong and consistent financial results.

Third quarter revenue grew 14%, resulting in another record revenue quarter.

This is the fourth consecutive quarter of double-digit growth.

We also delivered double-digit non-GAAP EPS growth for the fourth consecutive quarter with EPS growth outpacing revenue growth in each of these quarters.

In the first nine months of 2026, year-over-year revenue grew 12%, adjusted operating margin expanded 300 basis points, and adjusted EPS grew 46%, underscoring the consistency of our execution and the strength of our momentum.

These results are driven by the tremendous work of our Protolabs team and their continued commitment to serving our customers. I want to thank them all. For everything they do every day.

The trends that drove strong performance in the first half of the year continued in the third quarter.

Larger strategic customers continue to broaden their relationships with Proto Labs and turn to us for more of their manufacturing needs across the entire product life cycle.

This is reflected in a 17% year-over-year increase in revenue per customer.

In addition, we served almost 21,000 customers in the quarter, up sequentially for the third straight quarter.

We continue to see strong demand in high-growth industries, including aerospace, defense, drones, robotics and data centers.

We work with most innovative companies in these markets, including Blue Origin, Relativity Space, Raytheon, AeroVironment, Shield AI, Agility Robotics and many others.

These customers need to rapidly move from ideas to prototypes and into production, making Proto Labs speed, quality and reliability increasingly critical.

We saw broad-based strength across our business in the third quarter with each of our three largest service lines growing double-digits year-over-year.

Factory CNC machining was particularly strong, growing 22% as our world-class speed continues to resonate with customers.

Global 3D printing revenues grew 12%, led by strong demand from metals and HP's multi-jet fusion technology or MJF.

Year-to-date, MJF revenue in our US factory operation is up more than 40%, and we are investing in additional capacity to support that growth.

Protolabs is at the center of a major shift taking place in manufacturing driven by four powerful macro trends.

First, reindustrialization. Companies are bringing manufacturing closer to their customers and building more resilient, regional, and sovereign supply chains.

Second, a wave of hardware innovation moving at the speed of software. Investment is accelerating across critical and emerging industries like space, drones, robotics, data centers and other highly engineered hardware that ultimately needs to be designed, tested and manufactured from prototype to production at faster speeds than ever before.

Third, physical AI.

AI is moving beyond software and into the physical world, driving a new generation of robotics, autonomous systems, intelligent machines, and other advanced products that require manufacturing to leverage physical AI and fourth, supply chain agility and scalability, as innovation accelerates. Companies need manufacturing partners that can invest and scale with them without the manpower and capital constraints of traditional supply chains.

This is exactly the environment Protolabs is built for.

We help customers move quickly from idea to prototype to production while delivering the quality, reliability and scalable capacity they need.

And we have an important structural advantage. Our true digital thread.

Protolab's software-native digital manufacturing model enables speed and automation today while creating a foundation to leverage AI and scale efficiently over time.

And with millions of CAD files and decades of manufacturing data in our library, we have a powerful foundation to apply AI, advance our manufacturing capabilities and create more valuable solutions for our customers.

We are already seeing the benefits of these trends in our business and we believe they create a significant opportunity for Proto Labs over the next several years.

We continue to invest in capabilities to capture the opportunity ahead.

We are advancing our four strategic pillars, elevating the customer experience, accelerating innovation, expanding into production and driving operational efficiency.

I'd like to share several important business and product upgrades with you now.

On ProDesk, we launched new metal 3D printing heat treatments, FDM printing capabilities, and additional CNC machining surface finishes, giving customers more control over part performance, surface quality, and finishing requirements.

Next, we continue to enhance the Protolabs network with improvements designed to accelerate. Order acceptance, improve partner communication, and strengthen quality.

We are also developing AI-assisted order checks to identify specification discrepancies earlier and further automate the customer and partner experience.

With respect to improving efficiency across the organization, last week we announced an enterprise implementation of Amazon Quick as part of our broader AI roadmap.

Our initial focus is on go-to-market workflows, where we believe AI can improve productivity, reduce response times, and streamline order-to-quote processing.

To accelerate implementation, we created forward-deployed AI engineer roles to identify high-impact use cases and design AI-enabled workflows across the organization.

Enterprise-wide implementation will continue into 2027, led by Mark Kermisch, our Chief Technology and AI Officer.

Technology is an important enabler of our strategy, and operational execution is the other.

In August, Sam Ramahi was named Chief Operations Officer. Sam brings over 25 years of executive operational leadership across global companies like Envent, Eaton. H1ywell, and more.

SAM will help advance our strategic pillars while focusing on driving operational excellence across safety, quality, delivery, and cost.

We are also expanding the talent and capabilities needed to execute our strategy. We have officially inaugurated our new global capability center in India.

Engineers are onsite and are working directly on our manufacturing and AI roadmap.

The talent and capabilities we are building in India will help accelerate progress across all four strategic pillars. The Strength Center strengthens our investments in technologies that will meaningfully improve productivity, including AI, automation and advanced manufacturing capabilities that support our broader digital manufacturing strategy.

Turning to Europe. Revenue grew double-digits in the third quarter, in part due to the go-to-market changes we initiated late last year.

We are very pleased with this performance, and I want to thank our team in Europe led by Piotr Horowitz for their continued execution and commitment.

We continue to advance the initiatives needed to return Europe to profitability, addressing the drivers of underperformance while putting the right organizational structure, operating model, talent and capabilities in place to execute more effectively.

These efforts are designed to complement the go-to-market changes already underway and support further operational improvements.

As I shared. Last quarter, the transformation in Europe remains a work in progress and it's a longer-term effort.

While we are increased by double-digit revenue growth, our objective remains unchanged, transform Europe into a contributor to both future growth and profitability.

Before I turn the call over to Dan, I want to highlight two recent recognitions of our commitment to manufacturing innovation.

In August, we announced a partnership with MIT and a grant supporting US manufacturing innovation research at MIT Industrial Performance Center.

And in September, Protolabs was one of the only 500 U.S. Companies named to Business Insiders America's Most Innovative Businesses 2027 list.

We are proud of both recognitions and believe they reinforce Protolabs' position at the center of manufacturing innovation.

In closing.

I am very pleased with our results through the first nine months of the year and the progress we are making on our transformation.

At the same time, I believe we are still in the early innings of what this business can achieve.

We are executing our strategy at a time when some of the world's most innovative industries are moving faster, manufacturing supply chains are being reconfigured, and speed and digital manufacturing capabilities have never been more important.

We believe Protolabs is uniquely positioned for this environment and the opportunity ahead.

We remain focused on building on recent momentum and delivering sustained profitable growth and long-term value for our customers and shareholders. With that, I'll turn the call over to Dan to walk through the financials and outlook.

Thanks, Suresh, and good morning.

I'll start with an overview of our third quarter results, followed by our outlook for the fourth quarter.

Third quarter revenue was a company record $154.3 million, up 14.2% year-over-year in constant currencies.

US revenue grew 14.7%, while Europe grew 12.2% in constant currencies.

Third quarter CNC machining revenue grew 16.7% year-over-year in constant currencies.

Our largest service continues to see very strong demand in aerospace and defense, most notably space exploration, satellites and drones, as well as in robotics.

Injection molding grew 12.6% in constant currencies, driven by strength in electronics, aerospace and defense, and telecommunications.

3D printing revenue increased 11.5% year-over-year in constant currencies.

As we saw in the first half of 2026, demand in DMLS and MJF remained very strong in the U.S.

We continue to invest capital to expand capacity in those areas.

Sheet metal revenue declined 4.6% year-over-year in constant currencies with broad weakness across end markets. Partially offset by strength in aerospace and defense.

On to profitability, non-GAAP gross margin was 44.5% in the third quarter, down 230 basis points sequentially and 140 basis points year-over-year.

The lower gross margin was driven by our factory operations, primarily reflecting higher raw material costs, machine upgrades.

And targeted near-term investments in labor and contractor support.

These were made to accommodate the significant increase in volume over the course of the year, while maintaining our standards for speed, quality and reliability.

Third quarter non-GAAP operating expenses were $50.3 million, up $1.7 million compared to the prior year. Primarily reflecting increased investment in demand generation, along with higher contractor, professional services, and software license costs as we continue to fund our strategic priorities.

Importantly, we continue to generate significant operating leverage.

Adjusted operating expenses were 32.6% of revenue, down from 34.8% of revenue in the second quarter and 35.9% in the third quarter of 2025.

This operating leverage reflects both strong revenue growth and the targeted actions we have taken to improve our cost structure and reallocate resources toward our highest priority growth initiatives.

We continue to invest and add resources behind our strategic initiatives while identifying additional efficiencies that can help fund future growth.

Adjusted EBITDA was $26.2 million or 17% of revenue, up from $21.1 million or 15.6% of revenue in the third quarter of 2025.

Year-to-date, adjusted EBITDA is up 27.2% year-over-year.

Third quarter non-GAAP earnings per share were $0.63, up 33.4% year-over-year, driven by revenue growth, mix shift and significant leverage on our SG&A expenses.

$0.63 is the highest adjusted EPS figure we've reported since the third quarter of 2020.

Adjusted EPS is up 45.5% year-over-year-to-date.

We generated $22.8 million in cash from operations during the third quarter and we repurchased $5 million of common stock.

On September 30, we had $175 million of cash and investments on our balance sheet and zero debt.

Our outlook for the fourth quarter of 2026 is outlined on slide 14.

For the fourth quarter, we expect revenue between $143 million and $151 million. At the midpoint, this implies 8% revenue growth year over year.

As a result, we are raising our full year 2026 revenue growth outlook from a prior range of 8% to 10% to a new range of 10% to 11%. We anticipate 2026 will be our 1st year of double-digit organic revenue growth since 2018.

We expect foreign currency to have a negligible impact on revenue compared to the fourth quarter of 2025.

Our fourth quarter earnings guidance incorporates the following assumptions: non-GAAP add-backs will include stock-based compensation expense of approximately $4.1 million and amortization expense of $900,000, a non-GAAP effective tax rate between 19% and 21%.

In summary, we expect fourth quarter 2026 non-GAAP earnings per share between $0.46 and $0.54. That concludes our prepared remarks. Nicole, please open the line for questions.

( Operators Instructions )

Our first question comes from Brian Drabb with William Blair. Please go ahead.

Morning. Thanks for taking my questions, and congrats on a great quarter.

Thanks, Brian. Could you just start by talking about -- it looks like revenue per customer is up about 17%. And maybe add some granularity to that in terms of is it driven. By volume or is it also the breadth of services now that you're increasingly offering that's allowing for that that's just a very impressive result and where are you seeing the most success?

Hey, Brian, this is Turesh. Thanks for your question.

As we've talked before, we are absolutely focused on our four key strategic pillars, the first of them, which is elevating customer experience and the second of them, which is accelerating innovation on behalf of the customers and the third, which is expanding into production are all contributing to this particular growth that we are seeing in wallet share with our core customer base.

Some of the changes we've made to be able to do this well beyond the strategy is the way we are executing, we have an enterprise sales team, we are focused on a handful of industries that are high value for us and those sales teams are building deep customer relationships and listening and turning it around to provide innovation that is specific to these customers in the past, we may have innovated for the general customer base, which for us is.

Tens of thousands of customers to now being very focused on the customers where we see high value. So that is where we are able to drive wallet share and increase revenue per customer.

Thanks. And then seeing the stock, I'm surprised a little bit to see that the stocks indicating slightly down before they open here.

It could be just, the guidance for, midpoint of guidance is $0.50 for fourth quarter after you just put up $0.63. But is there, what is there beyond just typical seasonality for the fourth quarter that you're looking at as you guide for that fourth quarter?

Yeah, I mean, one, it is, typical.

I assume the seasonality that we've seen for the prior seven years for last quarter. So it is built in there that we expect to see some softness around the holiday time, which, as impacts that EPS number.

Second, gross margin, I'm assuming to be flat to slightly down quarter over quarter, we don't expect to see the same.

We talked about machine upgrade costs and so forth. We don't expect to see it at that high of a level, but as we have lower revenue and we have some inefficiency in our factories around the holiday time as we bring in contractors and overtime as employees are taking time off. And then I would expect SG&A expenses as a percent of revenue to look more like the first and second quarter.

Of the year rather than what we saw in the third quarter. So there is a pickup in SG&A expenses as well.

Got it. Okay. All right. I'll get back in line. I might have a couple more. Thanks.

Sounds good.

( Operators Instructions )

Our next question comes from Austin Bullitt with Needham. Please proceed with your question.

Hey, guys. Thanks for taking my question and congrats on the great results.

I was just hoping to get a little bit more color on kind of the growth you're seeing in the factory first and network. I didn't see what the revenue for the network was, if you could provide that.

Yes. So network revenue was up 3% year over year.

So that meant that factory growth was.

Up 17.5%. So again, we had higher growth in the factory than we had in the network.

From a network side, we are seeing really strong momentum in the network in Europe, but things are a bit softer in the US. Our customers, as we come to them.

They have a choice in this time in terms of do they need the speed that we're offering through the factory or do they need the breadth of services and maybe longer lead time of the network and we are just seeing more of our customers in the US take advantage of that speed and you're seeing that and the tremendous growth.

Got it.

And then just one follow-up. So with all the defense or A&D success more broadly, like with your conversations with your customers, how are you guys feeling just with like some uncertainty around the fiscal '27 budget, continuing resolution, continuing through 2027?

Do you guys think that like this momentum can continue even with some kind of lingering uncertainty around future budgets?

Yeah, Austin, thanks for bringing that up.

We are very broad-based in terms of the industry we serve, and A&D for us is very broad as well.

While there might be some uncertainty around defense budget, we see tremendous opportunity in space exploration, in satellites, in drones, neo primes, along with the primes.

And then beyond that, we absolutely see non-AND sectors like robotics and data centers also growing. So we are very confident that when you look out into the future that we would continue to be able to drive our goal of double-digit growth for the foreseeable future.

All right. Well, keep up the great work, guys. Thanks for taking my questions.

Thank you.

Our next question is from Brian Drabb with William Blair. Please go ahead.

Oh, thanks. I was just wondering if you could talk maybe for Dan a little bit further out in terms of how you're thinking about the trajectory of gross margin.

And expense dollars as we think about 2027, maybe just directionally or high level at different projects and different expenses to think about it as we're modeling.

Yeah.

So we're in the middle of establishing our 2027 budget and plans as we speak.

But what I would tell you is. We're going to continue to accelerate our investment in several areas.

One is expanding our capacity. And the second is investing in our strategic pillars. So that's elevating our customer experience, accelerating innovation, expanding into production, and driving operational efficiency. So with the last one, our objective from a spending perspective is really to focus on how do we continue to increase our efficiencies.

As we invest.

I would expect next year from an operating expense perspective that the growth in operating expenses would be much closer to the revenue growth next year than what we saw this year as we start to make these investments.

From a gross margin perspective, it really is going to depend on the mix that we're seeing and the different types of products that we have.

And how that plays out as we go through the year.

But I would expect that we would be able to hold our gross margin percentage as we go into 2027.

Okay.

Okay.

I got it.

I think I'll follow-up more later on that, but that's really clear. Thanks, Dan.

Yes.

Our next question comes from Greg Palm with Craig Hallam. Please proceed with your question.

Yeah, thanks.

Sorry if this got, I guess, maybe explained or specified. I've been juggling a handful of calls this morning. But in terms of maybe the sequential gross margin bridge from Q3 to Q2, a couple hundred basis points, give or take.

Dan, I know you listed a bunch of reasons, but just can you break that out between them and then just in terms of sustainability or confidence in getting that gross margin level back up from here, maybe just a little bit more color on that, please?

Just to be clear, Greg, you're talking about Q2 to Q3 gross margin?

Correct.

All right.

Yeah.

Greg, as you noted in our prepared remarks, demand has been exceptionally strong in our US factory CNC, revenues have grown over 20% for six quarters in a row. So while our automated model is designed to scale efficiently with this kind of volume increase, we in this particular quarter had to do some machine upgrades. We found opportunistically a window where we could do that and some of our order machines were upgraded. So that they could start to perform at the same rate as some of the newer machines that we have acquired more recently. We have acquired over 40 new machines this past year. So those expenses were incurred within the quarter and not capitalized. And then there was some contract labor we had to bring in for our support services because we were chasing this growth and make sure that we could deliver everything we needed for our customers within the time frames that we provide them.

Beyond that, there was raw material increases that we saw.

So those are the pressures that we got in Q3 versus our Q2 performance.

Greg, just to provide more specifics, I would say there's about 100 basis points in those machine upgrades. There's probably about 90 basis points in that contract labor and the remaining in the material costs.

I just want to.

Reemphasize the contract upgrades and obviously the contract labor, those are all variable costs that we can choose to move overtime and it's really focused on making sure that we have speed, the quality and reliability for our customers.

Okay, so just to be clear though, do some of that, I mean you incur that completely in Q3 and then it goes away completely for sort of Q4 and go forward or?

One thing I would say is we're always using contract labor, right, to vary depending on the volume that's coming in. But yeah, there is some assumption in the guide that cost comes down as we're in fourth quarter. But what is kind of counteracting that, right, is the lower volume that is in the middle of the guide as well as seasonality. So we may have to use some of that contract labor and some of that overtime as our employees take off for the holiday.

Yeah, understood. Okay. Appreciate the call.

Once again, if you would like to ask a question, please press star one on your telephone keypad.

And it looks like we have no more questions in the queue. This now concludes our question-and-answer session. Ladies and gentlemen, thank you for your participation. This concludes today's teleconference. Please disconnect your lines and have a wonderful day.