使用警語:中文譯文來源為 AI 翻譯,僅供參考,實際內容請以英文原文為主
Operator
Good morning. My name is Jamie and I will be your conference operator today. At this time, I would like to welcome everyone to Novanta Inc.'s third-quarter 2026 earnings call. (Operator Instructions) Please also note today's event is being recorded.
At this time, I would like to turn the floor over to Marci Mutti, corporate finance leader for Novanta. Please go ahead.
Marci Meditz - Corporate Finance Leader
Thank you very much. Good morning, and welcome to Novanta's third quarter 2026 Earnings Conference Call. This is Marci Mutti, Corporate Finance Leader for Novanta.
With me on today's call is our Chair and Chief Executive Officer, Matthijs Glastra our Chief Financial Officer, Robert Buckley and our Co-Chief Operating Officers, Chuck Ravetto and John Lesica. If you have not received a copy of our earnings press release issued last night, you may obtain it from the Investor Relations section of our website at www.novanta.com. Please note this call is being webcast live and will be archived on our website shortly after the call.
Before we begin, we need to remind everyone of the safe harbor for forward-looking statements that we've outlined in our earnings press release issued last night and also those in our SEC filings. We may make some comments today, both in our prepared remarks and in our responses to questions that may include forward-looking statements. These involve inherent assumptions with known and unknown risks and other factors that could cause our future results to differ materially from our current expectations.
Any forward-looking statements made today represent our views only as of this time. We disclaim any obligation to update forward-looking statements in the future, even if our estimates change. You should not rely on any of these forward-looking statements as representing our views as of any time after this call.
During this call, we will be referring to certain non-GAAP financial measures. A reconciliation of such non-GAAP financial measures to the most directly comparable GAAP measures is available as an attachment to our earnings press release. To the extent that we use non-GAAP financial measures during this call that are not reconciled to GAAP measures in the earnings press release, we will provide reconciliations promptly on the Investor Relations section of our website after this call. I am now pleased to introduce the Chair and Chief Executive Officer of Novanta, Matthijs Glastra.
Matthijs Glastra - Chairman of the Board, Chief Executive Officer
Thank you, Marcy. Good morning, everybody, and thanks for joining our call. The third quarter was a milestone quarter for Novanta.
We closed the largest acquisition in our history, Riverpoint Medical, and at the same time delivered results ahead of expectations on revenue, adjusted EBITDA and adjusted EPS. Revenue grew 23% on a reported basis to $305 million with organic growth of nearly 10%, our strongest organic growth in more than three years. Adjusted EBITDA grew 38% to $80 million or 26% EBITDA margin, the highest in Novanta's history and an expansion of 290 basis points year over year.
Adjusted EPS grew 21% to $1.05. Customer bookings grew 29%, resulting in a book-to-bill of $1.08 and a backlog of $543 million with core backlog up 14% year over year. Year-to-date operating cash flow of $156 million is nearly three times what we generated in the same period last year.
And Riverpoint Medical performed in line with our expectations in the first two months as part of Novanta with an exciting innovation pipeline ahead. Before I turn to our 2026 priorities, a word on our long-term direction and on how our proprietary competencies in high-growth markets reinforce each other. This quarter is evidence of both.
Our direction has been consistent and deliberate, more medical, more recurring. And less cyclical. It drives our capital allocation with Riverpoint the most recent example.
Medical end markets are now 53% of revenue, approaching 60% on a full-year basis with Riverpoint. We win in high-growth end markets with durable secular tailwinds by solving our customers' most complex needs with proprietary platform technologies, built on competencies honed over decades. Let me touch on three of them.
First, precision motion and robotics. Servo drives, force torque sensors, and position sensors let its surgical robot position its arm with micron precision and sense force and torque, giving the surgeon a sense of feel while keeping the system safe. The same technology sits inside warehousing humanoid robotics.
In advanced surgical equipment. These capabilities are one of the core drivers of our robotics and automation revenue growth, 17% in the quarter and 13% year to date, with sustained momentum into 2027. Second, precision fluid and flow management for minimally invasive surgery.
The same precision control competency underpins our surgical insufflators and pumps, which control fluid and CO2 gas, where any loss of control puts patient safety at risk. We have leveraged this position to expand into consumables for the same endoscopic workflows. Recurring consumables across sports medicine, minimally invasive surgery, and surgical robotics now represent roughly 25% of Novanta's revenue.
And have become a durable growth engine for the company. Third, laser beam steering and conditioning, shaping and controlling light with extreme precision. In ophthalmology, it supports retinal imaging and refractive eye surgery.
In life sciences, it enables cellular and genetic analysis. And in manufacturing, it guides the systems that builds medical implants layer by layer. And in semiconductors, it sits inside the lithography systems that pattern the most advanced chips and the tools that inspect them.
Our precision manufacturing business covers all these applications and grew 14% in the third quarter with a strong innovation pipeline ramping in 2027. Running through all these three competencies is embedded software. It powers our intelligent subsystems, which now represent roughly 25% of our revenue and about 75% of our new product launches.
Embedded software lives inside the hardware, controlling it in real time and turning physical measurements into data that applications can use. Our differentiation lies in the software with proprietary control algorithms, closed-loop control, safety certification, and real-time data processing. That position makes us the source of the data.
The same competencies span the fastest-growing parts of medical and advanced industrial markets. And they grow because they solve real problems: healthcare productivity through early disease detection and less invasive surgery; labor shortages through robotics in factories and warehouses; and the technologies behind the manufacturing of next-generation semiconductors, medical implants, and aerospace components. Our breadth matters commercially as well.
Our largest OEM customers span multiple businesses, and we manage them as one Novanta. So a design win in one business becomes the invitation into the next. So against this backdrop, we remain focused on our three priorities for 2026.
First, organic growth. Our innovation engine continues to deliver, and it is what underwrites our long-term algorithm of mid to high single-digit organic growth. New product revenue grew 23% in the quarter and is up 47% year to date, lifting our Vitality Index to approximately 27% of sales year to date.
Bookings grew 29% in the quarter or 18% excluding Riverpoint Medical and are up 22% year to date. Incremental design wins increased 63% in the quarter and are up 19% year to date, driven by our Novanta Growth System Commercial Excellence Playbook. Three of our four business units grew organically in the quarter, led by double-digit organic growth in our Automation Enabling Technology segment.
John and Chuck will elaborate on examples of recent product launches and customers' wins. Second, acquisitions. We closed Riverpoint Medical in July.
It is integrating well and performing in line with our expectation with an exciting new product pipeline ahead. John will cover Riverpoint and our new business unit structure in more detail. Our near-term capital deployment priority is to delever, and our strong cash generation positions us to do that quickly to take advantage of follow-on opportunities in an active market.
Our third priority for 2026 is completing our manufacturing foundation through our regional manufacturing centers of excellence for two reasons. First, greater scale, lower complexity, and lower cost. Second, full in-region for-region capability.
Our customers take ownership at our factory gates, so building closer to where they sell minimizes their tariffs and logistics exposure. The strategy is making strong progress. In the second quarter, we consolidated two factories, and in the third quarter, launched the closure efforts of two more.
This puts us on track for 18 factories by the end of the first quarter of 2027, down from 21 a year ago. We also implemented our new SAP MRP system without disruption at two of our lighthouse centers. Even so, our third quarter gross margin and fourth quarter outlook are below where we want them to be, and we own that.
Much of the pressure is at our Stockport facility in the UK where temporary dynamics are coming together, resulting in a production slowdown in our factory for the remainder of the year. Fortunately, given the robust customer demand across Novanta, we were able to shift resources to ensure our revenue commitments are achieved regardless. And we now expect production in this facility to resume in the first quarter, allowing us to expand our gross margins another 100 basis points for the full year of 2027.
John and Chuck will say more about each. The macro remains complex, and we're watching it closely, where we have strong demand, a $543 million backlog. Continued new product momentum, and the strongest team Novanta has ever had.
As we look to 2027, we expect a full year of Riverpoint, Stockport behind us, and our new product momentum to drive gross margin expansion and strong earnings growth. Chuck Ravetto and John Lesica will walk you through their segments, new product launches, design wins, and customer momentum behind these results. John, over to you.
John Lesica - Co-Chief Operating Officer - Medical Solutions
Thanks, Matthias. Before I walk through the quarter, a quick word on how we will discuss the medical solution segment going forward. With the addition of Riverpoint Medical, we've expanded our advanced surgery business unit into advanced surgical technologies, which brings together our integrated insufflation and smoke evacuation, arthroscopy fluid management, and medical consumables franchises with Riverpoint's fiber-based sutures and implantable materials.
Medical solutions will now be reported through two business units, Advanced Surgical Technologies and Precision Medicine. Our reportable segments are not changing. Riverpoint's results are included from the date of acquisition and will be excluded from organic growth until the anniversary of the close in August of 2027.
In the third quarter, revenue in the Medical Solutions segment grew 30% on a reported basis and approximately 3% organically, in line with our outlook of 2% to 4% organic growth. Riverpointe Medical contributed approximately $33 million of revenue in the quarter. The segment saw a book-to-bill of 1.04, with precision medicine at 1.19 and our legacy advanced surgery business at 1.04.
New product sales grew 19% year over year, and the Vitality Index in this segment was 30% of sales. Our advanced surgical technologies business grew 66% on a reported basis and 12% organically year over year, ahead of the approximately 10% we expected. Organic growth was driven by new product launches, including the continued ramp of our second-generation insufflators and our medical consumables business.
Our pump platform is at an important point. Building on the arthroscopic development platforms we described last quarter, our first multi-indication fluid management system is completing regulatory submission and shipping clinical evaluation units. And the platform is progressing toward introduction with a leading surgical OEM in early 2027, with four other OEM programs in development.
The playbook is the one that works for insufflation, reduce procedure complexity, improve safety and workflow, lower the cost to own and serve, and build a recurring disposable stream behind every placement. Our Riverpoint Medical business performed in line with our expectations in the quarter, contributing approximately $33 million of revenue with margins in line with what we outlined when we announced the acquisition. Integration is progressing well.
Riverpoint moves recurring medical consumables to roughly 25% of Novanta's revenue, and we currently address only about 10% of the minimally invasive surgical consumables market. So we have a long runway to build on this platform. Riverpoint's newest knotless sutures launched with three of the leading sports medicine OEMs.
Are a good example of its innovation engine and over a third of Riverpoint's revenue comes from recently launched products. They are sold to the same surgeons and the same OEM customers we serve with our arthroscopy fluid management systems and pumps, giving us more content in the same procedures. We're excited about the opportunities ahead for these teams.
In our precision medicine business, sales declined 5% year over year, as we expected and discussed on prior earnings calls. Although bookings were strong with a book-to-bill of 1.19. The revenue decline is from our life sciences exposure, which is now less than 10% of Novanta's total revenue and was the result of a strategic decision to not pursue lower margin business for a next generation product.
A customer whose instrument has been negatively impacted by cuts in research spending and an overall maturing of the technology. We expect precision medicine to return to growth in late 2027 as we anniversary this impact and benefit from new customer wins as we continue to aggressively lean in and add new sockets in areas where precision and performance decide the outcome, such as proteomics, flow cytometry, advanced diagnostics and ophthalmology. In RFID, Keonn continues to win new customers and the base is broadening.
In the first half, Keonn added or expanded relationships with retailers across Europe, Latin America and North America. Retailers choose Keonn for one key reason. Keonn has solved the signal noise and interference problems that have long limited real-time locating in busy, crowded stores.
Inventory accuracy in a typical store is often only 65% to 75%. With Keonn, it's in the high 90s. Combined with our AdvanCloud solution, retailers get a reliable picture of what they have and where it is.
They improve the customer experience, employee productivity, reduce shrinkage, keep the right product on the shelf, and convert more sales. We're now bringing the same technology and value into healthcare with pre-production solutions in beta testing at hospitals in Spain. Real-time tracking lets staff ensure they have the right equipment and consumables in the room, accurately billing patients for the products used in the procedure, and helps to gain insights to optimize inventory and prep time for procedures.
Keonn's AdvanCloud software, which delivers real-time tracking and data insights in retail, brings the same value to the hospital floor while overcoming the same signal noise and interference challenges seen in retail. To bring it together, this was a strong quarter of execution and momentum for medical solutions. We delivered organic growth in line with our outlook, our innovation pipeline and product vitality are strong, and Riverpoint is integrating well. Chuck will now cover the automation enabling technology segment.
Charles Ravetto - Co-Chief Operating Officer - Automation Enabling Technologies
Thanks, John. In the third quarter, the Automation Enabling Technology segment revenue grew 16% year over year, ahead of our outlook of 12% to 14% growth and another sequential acceleration. The book-to-bill in this segment was 1.11 with both business units above one.
New product revenue for the segment grew 28% year over year in the quarter. Incremental customer design wins grew by 33% and the Vitality Index was 20%. Before I get into the two businesses, I want to step back and talk about what is driving demand across the segment because the same things show up in both.
Three end markets are doing most of the work: semiconductor, robotics and advanced manufacturing. Together, they represent roughly 40% of Novanta's revenue on a full-year pro forma basis. In semiconductor, we are seeing strength in advanced packaging, substrate production and front-end wafer fab equipment, which is driving demand for circuit boards and packaging substrates our customers produce.
In advanced manufacturing, the driver is the automation and digitization of production lines with ever-increasing demands for throughput, productivity, smaller form factors, and tighter tolerances, helped by a broad positive manufacturing capital spending sentiment as seen in the PMIs, which continue to improve. And in robotics, demand is strong across surgical, industrial, warehouse automation, and humanoids. Robotics is a roughly $2 billion addressable market growing about 10% a year, and it already represents about a quarter of Novanta sales, including medical robotics.
What lets us capture that demand is our new product pipeline, and it is showing up in exactly those applications. On the laser beam steering side. Demand for our Lightning III platform was a highlight in the quarter, led by laser additive manufacturing and electronics.
In laser additive manufacturing, our new 3D scan head delivers industry-leading speed and accuracy. Our performance on a leading additive manufacturer's current machines has earned us a significant share of its next-generation platform, and we won a second additive OEM in the quarter. In electronics, the same subsystems are winning in via-hole drilling for next-generation advanced packaging substrates in probe card production and in next-generation lithography.
We expect Lightning III bookings and revenue to keep increasing from here. On the Precision Motion side, we launched a new family of servo drives in the quarter, and we are introducing Volcano, our new integrated servo drive and encoder module, which combines our drive and position sensing technology in one compact unit and simplifies integration for customers in surgical robotics, humanoids and warehouse automation. In medical robotics, our sensing and motion technology won new content on a major orthopedic robotics platform.
And in humanoids, we have a strategic partnership with one leading developer to supply servo drives across their robot portfolio, and we continue to progress development programs with others. This is still early on a long development path, but the momentum is real. So whether it's a scan head in a 3D printer, a servo drive in a humanoid or a motion subsystem in a surgical robot, it is the same pattern Mathias described, proprietary technology designed in early with leading OEMs and markets with durable growth.
Let me now turn to how that played out in each business. Our precision manufacturing business, which mainly serves the industrial segment and semiconductor markets, in addition to some medical exposure, saw a year over year revenue growth of 14% with strong growth across the portfolio on the back of new products and improving PMIs. Book-to-bill was 1.06.
As Matthias referenced in discussing Stockport, we expect growth to temporarily moderate in the fourth quarter due to a delay in shipments for certain lithography products caused by an end-user test finding. We expect shipments to resume in the first quarter. In our robotics and automation business, revenue was up 17% year over year with a book-to-bill of 1.14.
Our air-bearing spindles business, which serves the mechanical drilling of electronics, is sold out for the next two years, and we expect to double the business over that period. The expansion of our China facility, partially funded by customers, to support that growth is on track for completion at the end of this year with plans to be fully ramped by April of 2027. I also want to announce, we just hired a new President of our robotics and automation business, Julie Eaton.
Julie joins Novanta most recently from Halma, where she served as a divisional Chief Executive Officer overseeing nine separate companies, including leading the acquisition of three of them. I'm thrilled to have her join us, leading one of the fastest-growing and most profitable businesses in the company. With that. I'll turn the call over to Robert to provide more details on our operations and financial performance. Robert.
Robert Buckley - Chief Financial Officer
Thank you, Chuck. The company's organic growth was nearly 10% in Q3 with strong growth across three of our four businesses. Our sales in the medical end markets represent 53% of total sales, while sales into advanced industrial markets was 47%.
Our third quarter 2026 non-GAAP adjusted gross profit was $143 million or 47% adjusted gross margin compared to $115 million or 46.5% gross margin in the third quarter of last year. Adjusted gross margins were up 50 basis points year over year, roughly flat sequentially. The addition of the Riverpoint medical acquisition and positive contribution from our industrial businesses offset the incremental headwind from redundant manufacturing costs associated with our manufacturing site moves.
Medical Solutions adjusted gross margin was approximately 44%, down 140 basis points year over year and up approximately 280 basis points sequentially. The sequential improvement reflects accretion from the Riverpoint Medical acquisition, while year over year was largely product mix and highly redundant factory costs. The overall automation enabling technology segment adjusted gross margins was approximately 51%, which is up 250 basis points year over year and down approximately 250 basis points sequentially, driven by factory redundant costs and transfer costs and higher material costs.
But as evident in our year over year performance, our teams continue to drive significant productivity. And stronger product mix from new products. Moving on, the GAAP R&D expenses were $26 million or approximately 9% of sales, which was down approximately 110 basis points versus the prior year.
Third quarter SG&A expenses were $58 million or approximately 19% of sales, which was down approximately 180 basis points year over year. Our GAAP results also included $19 million in acquisition-related costs, roughly $4 million in costs related to the planning and design phase of our manufacturing SAP implementation and $21 million in amortization intangible assets, all of which are excluded from our non-GAAP results. Non-GAAP operating expenses were $78 million or approximately 25.6% of sales.
Adjusted EBITDA was $80 million or 38% growth year over year for mid-teens, excluding Riverpoint, and a 26% adjusted EBITDA margin, the highest in our history. That was up 290 basis points versus the prior year. Stock compensation expense was $10 million in the quarter, above our expectations of nearly $9 million, driven by an adjustment of performance-based stock awards from better-than-expected financial performance.
Net interest expense was just over $8 million, reflecting a partial quarter of Riverpoint Medical financing. On the tax front, our non-GAAP tax rate in the third quarter of 2026 was 21%, compared to 24% in the third quarter of last year. Our non-GAAP adjusted earnings per share were $1.05 in the third quarter, up 21% year over year and above our expectations.
Diluted shares outstanding in the quarter were $42.7 million, reflecting the $300 million equity raise completed to support the Riverpoint Medical acquisition. Operating cash flow for the third quarter was $39 million compared to $8 million in the prior year, and free cash flow was $32 million. Year-to-date operating cash flow was $156 million, compared to $55 million in the prior year.
As expected, cash conversion stepped down sequentially, driven by the timing of the Riverpoint acquisition and from investments in inventory to support our manufacturing moves and ensure supply continuity. Supplies of rare earth materials and electronic components remain tight across our industry and, in some cases, are tightening further. But our teams did an excellent job shielding customers from the impact by building safety stock earlier in the year before the conditions worsened.
It is also a clear example of why we are building a regional manufacturing footprint. Operating in-region, for-region with a supply base close to our factories and our customers is proving to be a real advantage. In the quarter, we funded the $1.2 billion upfront purchase price of Riverpoint with $616 million of borrowings under our revolving credit facility, the proceeds of the equity raise and cash on hand.
We ended the third quarter with gross debt of $839 million with a gross leverage ratio of 2.7 times. Our third quarter cash balance was $149 million, and so our net debt was $689 million, giving us a net leverage ratio of 2.2 times, slightly better than we communicated this summer. Now turning to guidance, Novanta's third quarter came in ahead of our expectations on revenue, on adjusted EBITDA, on adjusted EPS and bookings.
And we ended the quarter with $543 million in backlog, reflecting strong demand. So for the fourth quarter of 2026, we expect GAAP revenue to be approximately $306 million to $312 million, which represents year over year reported growth of 18% to 21% and organic revenue growth of 5% to 7%. This outlook includes approximately $35 million of revenue from the Riverpoint medical acquisition.
For adjusted EBITDA for the fourth quarter of 2026, we expect it to be between $76 million and $79 million, representing growth of 25% to 30% year over year and approximately 25% EBITDA margin, which is approximately 150 basis points higher than the prior year. For the fourth quarter, we expect adjusted diluted earnings per share to be in the range of $0.91 to $0.96. Turning to the full year of 2026, we expect GAAP revenue to be approximately $1,135 million to $1,140 million, raising the low end of our prior range.
This represents reported growth of approximately 16% and organic growth of approximately 7%. For adjusted gross margins, we now expect full-year gross margins of approximately 46.5%, reflecting the temporary headwind of the lost factory absorption in Stockport. Full year non-GAAP operating expenses are approximately 27% of sales, excluding costs associated with restructuring and our SAP MRP implementations.
Depreciation expense for the full year will be approximately $19 million and stock compensation expense will be approximately $38 million. Interest expense will be approximately $23 million for the full year, reflecting a full quarter of acquisition financing. We expect our full year non-GAAP tax rate to be approximately 21% and full year diluted weighted average shares outstanding of approximately $42 million.
For the full year, we expect adjusted EBITDA to be between $274 million and $277 million, which represents year over year growth of 24% to 25%. And adjusted diluted earnings per share in the range of $3.66 to $3.71, representing year over year growth of 11% to 13%. The update to our EPS range reflects the updated gross margin outlook and the higher stock compensation expense.
The latter was approximately $0.03 from the true-up of the performance stock unit performance in the third quarter. From an operating cash flow perspective, we expect to generate approximately $200 million for the full year of 2026, a record for the company and more than three times what we generated in 2025 despite completing the largest acquisition in the company's history.
Gross debt at year-end is expected to be approximately $818 million with a gross leverage ratio of 2.6 times and net leverage of approximately 2.1 times. We remain on track with the delevering path we've outlined when we announced the acquisition. In summary, we delivered nearly 10% organic growth in the third quarter, along with 38% adjusted EBITDA growth and 21% adjusted EPS growth, while closing the largest acquisition in the company's history.
Bookings grew 29%. Backlog stands at $543 million, and we remain on track to delivering approximately 7% organic growth and 16% reported growth. and record cash flow for the full year.
We also implemented SAP MRPs at two of our factories without disruption, while relocating two manufacturing factories into new regional manufacturing factory footprints and while mitigating significant industry supply chain shortages. Our teams have shown remarkable resolve and skill, navigating shifting macroeconomic and geopolitical conditions and supply constraints while integrating Riverpoint, executing further manufacturing moves and upgrading our IT systems. In doing so, they have further strengthened Novanta's operating foundation.
Novanta is in the strongest strategic and financial position in more than a decade, with three of the four business units seeing strong positive growth. We have leading positions in high-growth end markets, exciting new customer wins and continued momentum from our new product launches. This gives us confidence in delivering on our 2026 commitments.
Looking ahead, we currently expect to see a 2027 outlook of more than 15% reported growth and more than 20% adjusted EBITDA growth and we will provide more specific guidance while we report our year-end results. This concludes the prepared remarks. We'll now open the call up for questions.
Operator
(Operator Instructions) Lee Jagoda, CJS Securities.
Lee Jagoda - Analyst
So could we just start with Stockport and maybe give us a little more detail around what exactly happened there, the magnitude of the gross margin headwind both in Q3 and in Q4 and then just your confidence around this really being isolated to 2026 and not leaking into the first part of '27?
Matthijs Glastra - Chairman of the Board, Chief Executive Officer
Yeah, I'll take the first part and then Robert will comment on the margin. So basically, this is a result and this is not uncommon. And we're designing into really sophisticated systems, which include really sophisticated tests that are done by our customers and their customers.
And let's say a major end user found an issue, which is not uncommon. We are correcting it and are confident about that correction, but as a result, we basically are not shipping, right, while we're correcting the situation, we expect to restart shipment in the first quarter as we're working through this issue. The program is not in jeopardy.
The customer wants this product. And so while this is a disappointment, obviously, and it impacts our fourth quarter, particularly the margins, it's a temporary headwind, right? So that's how you need to see the exact timing, of course, when it turns back on. We're working on what we expect that to be in the first quarter. On the margin side, Robert will further comment on it.
Robert Buckley - Chief Financial Officer
Yeah, let me just add to that that you have somewhat of a perfect storm happening there, so you have redundant costs because we are moving two factories into that location and so we have redundant factory costs, overhead costs, labor sitting there. And then we've taken out the revenue in the quarter as we deal with this one topic and we scale down our life science customers. So it's sort of a perfect storm all happening at the same quarter, none of which has any legs to it and goes into 2027.
So there's roughly a 200 basis point impact as a consequence of this. So we're reporting something closer to 46% in the fourth quarter, it should be 48%. And so we will start to bounce back as we get into the first quarter and begin those shipments back up.
And then as we scale down the redundant costs from those factory moves, the gross margin should pop probably by the second quarter again. So we will be back on track. It's just a temporary impact of the fourth quarter.
Matthijs Glastra - Chairman of the Board, Chief Executive Officer
Yeah, and let me add, Lee, is that, yeah, obviously you see a dip in the precision manufacturing business as a result in the fourth quarter, but we're very confident that that will reaccelerate in the first quarter and in '27 on the basis of all the dynamics that Chuck and myself discussed. So we're really bullish on the outlook. We just have to work through that temporary blip in the fourth quarter.
Lee Jagoda - Analyst
And then I guess I was going to say you don't want to give guidance for '27, but you've already kind of given us the at least 15% top-line and at least 20% EBITDA growth.
Obviously, the Riverpoint business mixes the gross margin higher as we look out to '27, even without all the noise we just went through. What are the other puts and takes around the legacy Novanta business that we should be thinking about as we're looking at like the 100 basis points of margin improvement in total, including Riverpoint year over year.
Robert Buckley - Chief Financial Officer
Well, the other big impact would be the redundant factory costs and then resolving this issue, so as we get through it, we will quickly bounce back to something closer to a 48% gross margin. Probably somewhere around the second quarter. And then how that unfolds for the full year, there should be more tailwinds than anything.
So obviously, it's possible you get a little bit better than that impact cap, but I don't want to get into specific items at this point. I would just say that we feel extremely confident that we will expand gross margins at least 100 basis points next year. No, and I would just say, we just said that the long-term organic growth algorithm is intact, so for the core business there for '27 as well. So you can probably do the math, but that is looking solid.
Lee Jagoda - Analyst
And then just one more for me. You gave us a whole bunch of different data points on the spindles business, including your building out capacity to double capacity, you're sold out for the next two years.
I think you said that the capacity will be online Q2 of 2027. Is that to say that capacity is going to get filled in Q2 or very shortly thereafter?
And is the doubling of revenue more likely to happen. In '27 or is it kind of a ramp towards doubling in sometime in '28?
Robert Buckley - Chief Financial Officer
Yeah, consider it like a linear ramp, right? So we expect to double by 2028 is really. So we've expanded the facility to double capacity.
We'll fill that capacity by 2028. So there'll be a little bit of a linear path there that comes up. You're right in that obviously the impacts are muted in the first.
Quarter because you're not fully ramped up on production and then you quickly start shipping product out in the second quarter, which therefore helps your organic growth profile from the second quarter onward and then it acts as that tailwind throughout 2028 and we don't mean to imply, oh and then after that, there's some unforeseen. Risk to the business, we're actually seeing continued demand come into the business and optimism. We just don't want to get too far ahead of it and over the edge of our skis until we get better visibility into commitments given the customer base.
Lee Jagoda - Analyst
So is that business actually big enough so that when that capacity comes online and it's not fully ramped yet, is that actually a temporary headwind to the gross margin in like Q1, Q2 of next year ahead of filling that? Or is it negligible and we've noticed it?
Robert Buckley - Chief Financial Officer
So even with the expansion, it's a great question, Lee, because we seem to always have a little bit of a headwind from redundant manufacturing costs. But in their specific case, the gross margin profile is better than the company average. And so as a consequence, it doesn't have an impact on the total company.
Lee Jagoda - Analyst
Okay, sounds good. I'll hop back in.
Operator
(Operator Instructions) Brian Drab, William Blair.
Brian Drab - Equity Analyst
Hi, good morning. Congrats on the results.
First one, just on operating expense, I was a little low modeling that in the third quarter.
It seemed like maybe we'd step up a little bit as you incorporate Riverpoint into the numbers. Can you just talk about some of the dynamics on affecting SG&A in the quarter and how to model SG&A in the fourth quarter if you could?
Robert Buckley - Chief Financial Officer
Yeah, I think the reason we had a little bit of higher SG&A in the second quarter as a consequence of truing up bonuses. Obviously, with the company's better financial performance, the variable compensation will pay out at a higher rate and therefore, we trued that up in the second quarter. And that doesn't repeat in the third quarter.
So if you carried forward the second quarter operating expenses, the third quarter would be overstating the run rate, it actually would be coming in a lot less than that. So as you look at the fourth quarter, the SG&A expenses should largely be in line, a little bit higher than the Q3 is sort of the guidance that I provided. Not a lot of variability in terms of your pure SG&A.
There will be a little bit of an uptick in R&D expenses. But on the margin, I would say that the expenses should be just a little bit higher than where they were in the third quarter.
Brian Drab - Equity Analyst
Okay, got it. Here's a small one for you. Is there a headwind from fewer selling days in the fourth quarter?
Robert Buckley - Chief Financial Officer
You mean from some sort of factory closure in the last week? We have the same number of selling days, but if you're referring to how most people close their factories at the end of the year.
Brian Drab - Equity Analyst
You have that or just how the calendar works and how you report is looking like possibly you're going to have maybe four or five fewer selling days, which. Would impact organic revenue growth by maybe almost a point. I was just curious if you had any comment on that.
Matthijs Glastra - Chairman of the Board, Chief Executive Officer
Maybe modestly, but quite frankly, the main drivers we discussed, right? And it's the temporary production hold in that lapping we need to do on the precision medicine side. And the precision manufacturing will bounce back, right, and will accelerate further in 2027 based on what we discussed.
So see it more as kind of a debt we got to work through there temporarily and then it will accelerate from there in Q2 next year onwards.
Brian Drab - Equity Analyst
Got it. And then for the detail on what's happening in the UK facility, it seems clear that you have.
Root cause of the issue and are in the phase of the, just you are into the corrective action phase. Is that how to think about it?
Matthijs Glastra - Chairman of the Board, Chief Executive Officer
Yeah. Yeah, that's a good way of thinking about it. I mean, listen, we have got to be careful getting into too much detail here, but you can imagine there are large players involved and they're up and to the right.
So it's really about. Getting the right test slots and getting everybody comfortable with extensive testing. So it's really more about testing and that is really now what we're going to work through, right?
And so that's really it. The customer wants the product. We're solving a real problem.
Really disappointed about this, obviously, but it is what it is. We work through it and the precision manufacturing business will bounce back in the first quarter and so will margins shortly after.
Brian Drab - Equity Analyst
And then just the last one, Robert, I think you said full year gross margin for 2026 around 46.5% and then again today, thanks. And then you said.
Expect the typical 100 bps of gross margin expansion at least in 2027, that gets you 47.5%. It does feel like there should be upside into that if you're doing 48% in the second quarter and there's upside from the 48% as you move through the year. Is that fair?
Robert Buckley - Chief Financial Officer
Yeah, no, that's fair. I don't like doing i don't want to get ahead. We just we had a.
Accidental stop shipment at a facility at the wrong time just as we're moving stuff in. So I don't want to kind of get overly optimistic after just going through that event. But I think it's fair to say that with everything kind of clicking on at the pace in which we click on, the redundant cost coming out of the P&L, the better mix of product coming out, the higher growth coming out, the better mix from the Riverpoint transaction.
You would be running at a better rate than that in 2027. You could also be running at a better organic growth in 2027. So I think we're obviously optimistic on the outlook, but we're also conservative at this point just to make sure that we get this behind us.
Brian Drab - Equity Analyst
I got it. Okay. Thanks very much.
Operator
And with that, we will be concluding today's question-and-answer session. I would like to turn the conference call back over to Matthijs Glastra for closing remarks.
Matthijs Glastra - Chairman of the Board, Chief Executive Officer
Thank you, operator, and thank you, everyone, for your questions. So to wrap up, the third quarter delivered ahead of what we said we would do, organic growth of nearly 10%, adjusted EBITDA up 38% with margins up 290 basis points. Adjusted EPS up 21%, bookings up 29% and a $543 million backlog.
And the largest acquisition in our history, closed, integrating and performing in line with our expectations. What I would most want you to take away is the direction, more medical, more recurring, more embedded software, less cyclical. Novanta's competencies are anchored in healthcare and leveraged into the advanced industrial markets through the same technology and the same customers.
That's what makes our growth more predictable with a mid- to high-single-digit long-term organic growth algorithm. In closing, as always, I would like to thank our customers, our shareholders, and especially our dedicated employees for their ongoing support. We appreciate your interest in the company and your participation in today's call. I look forward to joining all of you soon at our fourth quarter and full year 2026 earnings call. Thank you very much.
Operator
And with that, ladies and gentlemen, the conference has now concluded. We thank you for attending today's presentation. You may now disconnect your lines.