使用警語:中文譯文來源為 AI 翻譯,僅供參考,實際內容請以英文原文為主
Mike Bishop - Investor Relations
Mike Bishop - Investor Relations
Hello, everyone, and welcome to Atomera's second-quarter 2025 update call. I'd like to remind everyone that this call and webinar are being recorded, and a replay will be available on Atomera's IR website for one year. I'm Mike Bishop with the company's Investor Relations. As in prior quarters, we are using Zoom, and we will follow a similar presentation format with participants in the listen only mode.
各位好,歡迎參加 Atomera 2025 年第二季營運更新電話會議。提醒各位,本次電話會議與網路研討會將全程錄音,並將提供重播,於 Atomera 投資人關係(IR)網站上保留一年。我是公司投資人關係的 Mike Bishop。如同前幾季,我們使用 Zoom,並將採用類似的簡報形式,與會者將以僅聆聽模式參與。
We will open with prepared remarks from Scott Bibaud, Atomera's President and CEO; and Franc Laurencio, Atomera's CFO. Then we will open the call to questions. If you are joining by telephone, you may follow a slide presentation to accompany our remarks on the Events and Presentations section of our Investor Relations page on our website.
我們將先由 Atomera 總裁暨執行長 Scott Bibaud,以及 Atomera 財務長 Franc Laurencio 發表準備好的談話。接著我們將開放提問。若您以電話加入,可在我們網站投資人關係頁面的「活動與簡報(Events and Presentations)」區查看投影片簡報,以配合我們的說明。
Before we begin, I would like to remind everyone that during today's call, we will make forward-looking statements. These forward statements, whether in prepared remarks or during the Q&A session, are subject to inherent risks and uncertainties. These risks and uncertainties are detailed in the Risk Factors section of our filings with the Securities and Exchange Commission, specifically in the company's annual report on Form 10-K filed with the SEC on March 4, 2025.
在開始之前,我想提醒各位,今天的電話會議中我們將發表前瞻性陳述。這些前瞻性陳述,無論是在準備好的談話或問答環節中,皆受固有風險與不確定性影響。相關風險與不確定性已在我們向美國證券交易委員會(SEC)提交文件的「風險因素(Risk Factors)」章節中詳述,特別是公司於 2025 年 3 月 4 日向 SEC 提交的 Form 10-K 年度報告。
Except as otherwise required by federal securities laws, Atomera disclaims any obligation to update or make revisions to such forward-looking statements contained herein or elsewhere to reflect changes in expectations with regards to those events, conditions and circumstances.
除非聯邦證券法另有要求,Atomera 不承擔更新或修訂本文或其他地方所載任何前瞻性陳述之義務,以反映對相關事件、狀況與情勢之預期變化。
Also, please note that during this call, we will be discussing non-GAAP financial measures as defined by SEC Regulation G. Reconciliations of these non-GAAP financial measures to the most directly comparable GAAP measures are included in today's press release, which is posted on our website
另外請注意,本次電話會議中我們將討論依 SEC Regulation G 所定義的非 GAAP 財務衡量指標。這些非 GAAP 財務衡量指標與最直接可比的 GAAP 指標之調節表,已包含於今日新聞稿中,並已張貼於我們的網站上。
Now I would like to turn the call over to our President and CEO, Scott Bibaud. Go ahead, Scott.
現在我想把電話會議交給我們的總裁暨執行長 Scott Bibaud。Scott,請。
Scott Bibaud - President, Chief Executive Officer, Director
Scott Bibaud - President, Chief Executive Officer, Director
Thanks, Mike. Right now, there are a number of macro factors in the semiconductor industry that are in favor of our product initiatives. For this reason, wafer activity at Atomera and customers is currently running at a much higher level than we typically experience, which reflects the number of irons Atomera has in the fire.
謝謝你,Mike。目前半導體產業有多項總體因素正有利於我們的產品推動計畫。因此,Atomera 以及客戶端的晶圓活動目前遠高於我們通常的水準,這反映出 Atomera 同時推進的專案相當多。
On today's call, I'd like to give you a flavor of our activity and how new applications of MST are driving our business. Let me start with a review of our work with licensees. A few months ago, STMicro announced a new initiative to reshape their manufacturing footprint to 300-millimeter silicon production.
在今天的電話會議中,我想讓各位了解我們的活動概況,以及 MST 的新應用如何推動我們的業務。我先從回顧我們與授權客戶(licensees)的合作開始。幾個月前,STMicro 宣布一項新計畫,將其製造版圖重塑為以 300 毫米矽晶生產為主。
It was not entirely clear to us how this would affect the Smart Power segment, Originally, the first BCD 110 process with MST was to launch using 200-millimeter wafers and later, the process would be ported to 300-millimeter. We just heard recently as part of the reshaping initiative that ST has changed plans and decided to go directly to 300-millimeter, which will delay the rollout of BCD 110 with MST.
我們當時並不完全清楚這將如何影響智慧電源(Smart Power)事業部門。原先規劃是,第一個導入 MST 的 BCD 110 製程將以 200 毫米晶圓量產啟動,之後再移植到 300 毫米。我們最近在該重塑計畫中得知,ST 已改變規劃並決定直接採用 300 毫米,這將延後導入 MST 的 BCD 110 推出時程。
We do not have a revised schedule, but it's now clear that we will not enter process qualification in 2025. While the delay is disappointing, ST's ambitions for advanced BCD are definitely very aggressive, targeting a significantly higher 300-millimeter wafer capacity at full build-out than we initially expected.
我們目前尚未取得更新後的時程,但現在已明確,我們不會在 2025 年進入製程認證(process qualification)。雖然延遲令人失望,但 ST 對先進 BCD 的企圖心確實非常積極;在全面建置完成後,其 300 毫米晶圓產能目標將顯著高於我們最初的預期。
We are very excited by the revenue potential represented by those numbers. The move to 300-millimeter wafers is logical since they are fundamentally less expensive than 200-millimeter, which hopefully should assist adoption. As mentioned on our last call, ST has continued to support the adoption of MST in multiple other applications with more BUs expressing new interest this past quarter as well.
我們對這些數字所代表的營收潛力感到非常振奮。轉向 300 毫米晶圓是合乎邏輯的,因為其基本成本低於 200 毫米,這也希望能有助於導入採用。如同我們在上次電話會議提到的,ST 也持續支持 MST 在多項其他應用的導入,而在本季也有更多事業單位(BUs)表達新的興趣。
We've reached a new high watermark on customer wafer runs at both our facility and our customers' fabs. Many of our licensees are in the process of doing demo runs with us that we hope would lead to production decisions. And during the last quarter, we were able to deliver to them new insights into incremental improvements they can get with MST.
我們在自家設施與客戶晶圓廠的客戶晶圓試跑(wafer runs)已達到新的高水位。我們許多授權客戶正與我們進行展示(demo)試跑,我們希望這能促成量產決策。並且在上一季,我們也向他們提供了新的洞見,說明透過 MST 可獲得的額外增量改善。
Let me provide a few updates on some important customers. At JDA1, meetings with a new senior level management team in conjunction with support from our capital equipment partner makes us believe that the wafers we are working on for them will drive a decision to use MST in a new application. Both JDA2 and our fabless licensee are in the process of doing wafer runs with us. We believe these will be critical in reaching a production decision once they've been able to test the final devices.
我來針對幾個重要客戶提供一些最新進展。在 JDA1,我們與新的高階管理團隊會面,並結合我們資本設備合作夥伴的支持,使我們相信目前為其進行的晶圓工作將推動其在新應用上採用 MST 的決策。JDA2 與我們的無晶圓廠(fabless)授權客戶也正在與我們進行晶圓試跑。我們相信,一旦他們能夠測試最終元件,這些試跑將是達成量產決策的關鍵。
At our foundry licensee, we are currently in a TCAD exercise to define our next steps as well. Two calls ago, I spoke about a couple of new potentially transformative customers we had started working with. Each of these customers is now running wafers with MST, one in a large-scale demo plan encompassing two business units and the other engaged on multiple wafer runs to test out different MST applications.
在我們的晶圓代工(foundry)授權客戶方面,我們目前也正在進行一項 TCAD 分析,以界定下一步行動。在兩次電話會議之前,我曾提到我們開始與幾位可能帶來轉型的新客戶合作。目前這些客戶都已在以 MST 進行晶圓試跑:其中一位正在執行涵蓋兩個事業單位的大規模展示計畫;另一位則進行多次晶圓試跑,以測試不同的 MST 應用。
Several other customers are in various stages of investigating MST for their products as well. As I said at the beginning of the call, our team is very busy right now, and this is a real positive for our future business. A substantial part of our activity is targeting the advanced gate-all-around and DRAM areas where our source strain diffusion blocking capabilities are particularly interesting, but by no means the only solution we are offering.
另有數位客戶也正處於不同階段,評估 MST 用於其產品的可行性。如同我在電話會議一開始所說,我們的團隊目前非常忙碌,這對我們未來的業務是非常正面的訊號。我們相當大一部分的活動聚焦於先進的環繞閘極(gate-all-around)與 DRAM 領域,在這些領域中,我們的源極應變擴散阻擋(source strain diffusion blocking)能力特別引人關注,但這絕非我們提供的唯一解決方案。
In these new nodes, everyone is focused on yields and MST is a tool that can help improve yields. In the power area, our ability to simulate different architectures and integration techniques using TCAD and our own internally developed AI tools has allowed us to propose solutions to customers, which we do not believe are possible to implement without MST and have led to potential breakthrough levels of performance.
在這些新節點上,所有人都聚焦於良率,而 MST 是能協助提升良率的工具。在電源領域,我們運用 TCAD 以及我們內部自行開發的 AI 工具,模擬不同架構與整合技術的能力,使我們得以向客戶提出解決方案;我們認為這些方案若沒有 MST 將難以實作,並已帶來可能達到突破性效能水準的成果。
Our work with Sandia and other partners on gallium nitride is making great progress. This past quarter, we've come to understand even better how MST can benefit GaN devices, causing us to expand our focus from exclusively GaN for power to also include GaN for RF. To accelerate this work during the last quarter, we announced a strategic collaboration with Incize, a well-recognized and respected RF test house.
我們與 Sandia 及其他合作夥伴在氮化鎵(gallium nitride, GaN)方面的工作進展非常順利。在本季,我們更深入理解 MST 如何使 GaN 元件受益,因此我們將重點從僅限於電源用 GaN,擴展到也涵蓋射頻(RF)用 GaN。為了在上一季加速這項工作,我們宣布與 Incize 展開策略合作;Incize 是市場上知名且備受尊敬的 RF 測試機構。
They will help us characterize this technology in terms that the market will appreciate, making it easier for designers to translate our process changes to RF electrical spec improvements. We believe RF will be an important growth area for GaN in the future, and several potential customers have already stepped forward expressing an interest in our work.
他們將協助我們以市場能理解與重視的方式來表徵這項技術,讓設計人員更容易把我們的製程變更轉換為 RF 電性規格的改善。我們相信 RF 將是未來 GaN 的重要成長領域,且已有數位潛在客戶主動表達對我們工作的興趣。
Finally, in RF-SOI, we have expanded our offerings to also include the key devices for low-noise amplifiers or LNAs. I'd like to take a few minutes to give some background on why this LNA offering is so important. Historically, we've worked with RF-SOI customers primarily on RF power switches. Last year, many of those customers started asking if we could help improve LNAs in their mobile phone front-end products.
最後,在 RF-SOI 方面,我們已擴充產品內容,納入低雜訊放大器(low-noise amplifiers,LNA)的關鍵元件。我想花幾分鐘說明為何這項 LNA 產品提供如此重要。過去,我們與 RF-SOI 客戶的合作主要集中在 RF 功率開關。去年,許多這類客戶開始詢問我們是否能協助改善其手機前端(front-end)產品中的 LNA。
LNAs are the technology used by cellular phones to receive and amplify small signals. There are a number of reasons why LNAs need further improvement at this time. Carrier aggregation was introduced in LTE Advanced to increase peak data rates and network capacity by combining multiple spectrum chunks or component carriers into a single data channel.
LNA(低雜訊放大器)是行動電話用來接收並放大微弱訊號的技術。目前有多項原因使得LNA需要進一步改良。LTE Advanced引入了載波聚合(Carrier Aggregation),透過將多個頻譜區塊或組成載波(component carriers)合併為單一資料通道,以提升峰值資料速率與網路容量。
Manufacturers have been aggregating up to four carriers. But in the future, we expect to see 6 carriers, which means that more LNAs must be turned on to receive these signals, significantly increasing power consumption. New frequency bands associated with the evolution of 5G and 6G cellular are also driving the need for more active LNAs. The net result is that to bring features that customers are demanding for new phones to market, a solution to lower LNA power consumption must be found. That's where MST comes in.
製造商已經能聚合最多四個載波。但未來我們預期會看到6個載波,這代表必須啟用更多LNA來接收這些訊號,將顯著增加功耗。與5G與6G行動通訊演進相關的新頻段,也正在推動對更多啟用中LNA的需求。最終結果是,為了將客戶對新手機所要求的功能推向市場,必須找到降低LNA功耗的解決方案。這正是MST派上用場之處。
We took existing MST RF-SOI transistor silicon test data and then use TCAD to reoptimize implants for the LNA devices. We determined that MST can significantly improve the performance of LNAs by lowering the circuit bias current and hence, the power consumption. We believe based on market reaction, we have started promoting this capability just at the right time.
我們採用既有的MST RF-SOI電晶體矽測試資料,並使用TCAD重新最佳化LNA元件的離子植入(implants)。我們判定MST可透過降低電路偏壓電流,進而降低功耗,從而顯著提升LNA的效能。根據市場反應,我們相信我們在恰當的時機開始推廣這項能力。
Recently, we presented our findings at an RF technical conference and has generated lots of inbound interest. Indeed, during the last few months, we've worked with several different RF-SOI manufacturers to start new wafer runs using our partner, Soitec special ultrathin RF-SOI wafers to prove out those LNA benefits.
近期我們在一場RF技術研討會上發表研究成果,並引發大量主動洽詢的興趣。確實,在過去幾個月中,我們已與數家不同的RF-SOI製造商合作,透過我們的合作夥伴Soitec之特殊超薄RF-SOI晶圓啟動新的晶圓投片(wafer runs),以驗證這些LNA效益。
We'll be working hard to shore up this evidence with more data to entice customers to take it to market quickly. What is particularly exciting is that we can provide this LNA benefit in addition to the power switch benefit on RF front ends with a single deposition of MST on a wafer. So our customer can get two much needed solutions for the cost of one, which should make it even more attractive.
我們將努力以更多數據強化這些證據,以吸引客戶快速將其導入市場。特別令人振奮的是,我們只需在晶圓上進行一次MST沉積(deposition),即可在RF前端同時提供電源開關(power switch)效益之外的LNA效益。因此,我們的客戶能以一次成本獲得兩項迫切需要的解決方案,這應會使其更具吸引力。
We expect that this type of high visibility solution with end customer pull should go to market more quickly than a general performance improvement. I'm always impressed by the amazingly high levels of creativity and innovation demonstrated by Atomera employees across many diverse fields.
我們預期,這類具有高度能見度、且由終端客戶拉動(end customer pull)的解決方案,將比一般性的效能提升更快推向市場。我總是對Atomera員工在眾多不同領域所展現的驚人創意與創新能力印象深刻。
And today, I've spoken about some of the solutions we found for industry problems. You can also measure this innovation by the number of patents we file and have approved. This past quarter, our tally of issued and pending patents exceeded 400, which is quite a milestone for a company of our size. We are definitely punching above our weight. In the last month, we also joined the National Semiconductor Technology Center, which has a goal of extending US leadership in semiconductor technology.
今天我談到了一些我們為產業問題所找到的解決方案。你也可以從我們申請並獲核准的專利數量來衡量這項創新。在上一季,我們已核准與申請中的專利總數超過400件,對我們這種規模的公司而言是相當重要的里程碑。我們確實展現出超越自身量級的實力。在上個月,我們也加入了國家半導體技術中心(NSTC),其目標是延伸美國在半導體技術上的領導地位。
There, we expect to provide important contributions but also benefit from the NSTC focus on reducing the time and cost to prototype new semiconductor technologies like the ones Atomera is bringing to market. We believe this organization will help create the ecosystem necessary to continue the advancement of Moore's Law.
在那裡,我們預期能做出重要貢獻,同時也能受益於NSTC聚焦於降低新半導體技術(例如Atomera正推向市場的技術)原型開發時間與成本。我們相信該組織將有助於建立持續推進摩爾定律所需的生態系。
Finally, I'll just reiterate how many active engagements we have underway at Atomera and how we feel in the brink of several of them turning into commercial agreements. Team is working hard. Indeed, we are looking to hire several additional team members, but morale is high, and we're excited to see our innovations getting into production.
最後,我再重申Atomera目前正在進行的多項積極合作案,以及我們認為其中數項正處於即將轉化為商業協議的關鍵邊緣。團隊正努力工作。確實,我們也正在尋求增聘數名團隊成員;士氣高昂,並且很期待看到我們的創新進入量產。
When that happens, we continue to believe that Atomera will see increased adoption rates and shorter time to market as competitors race to catch up with those who are already using MST to get market advantage. We are working hard to make that day come as soon as possible. Now Frank will review our financials.
當那一刻到來時,我們仍相信,隨著競爭對手加速追趕那些已使用MST取得市場優勢的公司,Atomera將看到更高的採用率與更短的上市時間。我們正努力讓那一天盡快到來。接下來Frank將回顧我們的財務狀況。
Frank Laurencio - Chief Financial Officer
Frank Laurencio - Chief Financial Officer
Thank you, Scott. At the close of the market today, we issued a press release announcing our results for the second quarter of 2025. Our summary financials are shown on this slide. Our GAAP net loss for the second quarter of 2025 was $5 million or $0.17 per share compared to a net loss of $4.4 million in Q2 of last year, which was $0.16 per share. GAAP operating expenses in the second quarter of this year were $5.2 million, which was an increase of $565,000 from $4.6 million in Q2 2024.
謝謝你,Scott。在今日收盤後,我們發布新聞稿,公告2025年第二季的業績結果。我們的財務摘要如本投影片所示。2025年第二季GAAP淨損為500萬美元(每股0.17美元),相較去年第二季淨損440萬美元(每股0.16美元)。今年第二季GAAP營業費用為520萬美元,較2024年第二季的460萬美元增加56.5萬美元。
The increase in OpEx was due to a $415,000 increase in R&D expenses, reflecting both higher outsourced device fabrication work and increased payroll costs and a $215,000 increase in G&A expense, primarily due to higher payroll costs. These were partly offset by a decline in sales and marketing expense due to lower headcount.
營業費用增加主要來自研發費用增加41.5萬美元,反映委外元件製作工作增加以及薪資成本上升;以及一般及行政(G&A)費用增加21.5萬美元,主要同樣因薪資成本較高。上述部分被銷售與行銷費用下降所抵銷,該下降係因人力編制較低。
Non-GAAP net loss in Q2 2025 was $4 million compared to a loss of $3.6 million in Q2 of last year due to a $275,000 increase in non-GAAP OpEx, reflecting the same factors I just discussed. Stock compensation expense, which is the main difference between GAAP and non-GAAP operating expenses was $1.3 million in Q2 2025 and $1 million in Q2 2024.
2025年第二季Non-GAAP淨損為400萬美元,較去年第二季的360萬美元虧損增加,原因是Non-GAAP營業費用增加27.5萬美元,反映我剛才討論的相同因素。股票酬勞費用是GAAP與Non-GAAP營業費用之間的主要差異;2025年第二季為130萬美元,2024年第二季為100萬美元。
Sequentially, Q2 2025 non-GAAP net loss of $4 million compares to a $4.4 million loss in Q1, primarily due to payroll -- lower payroll expenses, reflecting lower headcount in sales and marketing as well as 401(k) timing issues. Our balance of cash and cash equivalents as of June 30, 2025, was $22 million compared to $24.1 million as of March 31. We used $3.5 million of cash in operating activities during Q2 compared to $4.8 million in the first quarter. The first quarter of every year has higher cash outlays for items that are expensed throughout the year.
以季比季來看,2025年第二季Non-GAAP淨損400萬美元,相較第一季虧損440萬美元,主要由於薪資費用較低,反映銷售與行銷人力較少,以及401(k)提撥時點因素。截至2025年6月30日,我們的現金及約當現金餘額為2,200萬美元,較3月31日的2,410萬美元下降。第二季營運活動使用現金350萬美元,相較第一季為480萬美元。每年第一季通常會有較高的現金支出,用於那些在全年期間攤銷列費的項目。
During Q2, we raised approximately $800,000 under our ATM facility, net of commissions and expenses of filing our shelf registration by selling approximately 185,000 shares at an average price of $5.21. Since the end of the quarter, we've raised an additional $2 million from sales of approximately 392,000 shares at an average price of $5.23, putting our current cash balance higher than at the end of Q2, which will allow us to be selective in accessing the market going forward.
第二季期間,我們透過ATM融資機制籌得約80萬美元(扣除佣金及申報棚架式註冊(shelf registration)的費用),以平均每股5.21美元出售約185,000股。自季末以來,我們又以平均每股5.23美元出售約392,000股,額外籌得200萬美元,使我們目前的現金餘額高於第二季末,這將使我們未來在進入資本市場時能更具選擇性。
For Q3, we expect to recognize a small amount of NRE revenue from wafer shipments to our fabless licensee and to the customer running a large-scale demo that Scott mentioned in his remarks. Timing of that revenue will depend on when wafers are shipped out to those customers. Given ST's shift to rolling out BCD110 only on 300-millimeter wafers, we do not expect that milestone payments for process qualification will happen until next year.
對於第三季,我們預期將因向我們的無晶圓廠(fabless)授權客戶,以及Scott在談話中提到、正在進行大規模展示(demo)的客戶出貨晶圓,而認列少量NRE收入。該收入的認列時點將取決於晶圓何時出貨給這些客戶。鑑於ST已轉向僅在300毫米晶圓上推行BCD110,我們預期製程認證(process qualification)的里程碑款項要到明年才會發生。
Moving to expenses. On our last call, I narrowed our expected range of non-GAAP OpEx for 2025 to a range of $17.25 million to $17.75 million. I'm maintaining that guidance, though we are tracking to the low end of the range. We've spread our outsourced fabrication work over multiple vendors to enable us to address the range of technology areas we're working on.
接著談費用。在我們上一次電話會議中,我將2025年非GAAP營運費用(OpEx)的預期區間縮小至1,725萬美元至1,775萬美元。我維持該指引不變,不過我們目前的趨勢落在區間低端。我們已將外包製造(fabrication)工作分散給多家供應商,以便我們能涵蓋目前正在推進的各項技術領域。
And this spending should trend back to our prior spending levels with TSI Semiconductor. We're also making solid progress in adding new leadership in sales and marketing and bolstering our engineering staff to support our unprecedented level of customer activity. With that, we'll turn the call back over to Scott for a few summary remarks before we turn the -- we open the call up for questions.
而這項支出應會回到我們先前與TSI Semiconductor合作時的支出水準。我們也在新增銷售與行銷領導團隊、並擴充工程人員方面取得穩健進展,以支援前所未有的客戶活動量。接下來,在我們開放提問之前,將把電話會議交回給Scott做幾點總結。
Scott?
Scott?
Scott Bibaud - President, Chief Executive Officer, Director
Scott Bibaud - President, Chief Executive Officer, Director
Thanks, Frank. Today, Atomera is offering the market several innovative solutions to problems that are difficult to solve without MST. I believe we are better positioned than ever to enable new capabilities for today's challenging electronic devices.
謝謝你,Frank。今天,Atomera正向市場提供數項創新解決方案,用以解決在沒有MST的情況下難以解決的問題。我相信,我們比以往任何時候都更具優勢,能為當今具挑戰性的電子裝置帶來新的能力。
With the amount of engagements, we have today with top semiconductor manufacturers, it's only a matter of time before that effort turns into the commercial success that will make Atomera a semiconductor technology licensing powerhouse. I appreciate your support as we work hard to turn this vision into a reality.
以我們目前與頂尖半導體製造商的合作互動數量來看,這些努力轉化為商業成功只是時間問題,而那將使Atomera成為半導體技術授權領域的強大力量。感謝各位在我們努力把這個願景化為現實的過程中給予支持。
Mike, we can now take questions.
Mike,我們現在可以開始提問。
Mike Bishop - Investor Relations
Mike Bishop - Investor Relations
(Operator Instructions)
(接線員指示)
Richard Shannon, Craig-Hallum.
Richard Shannon,Craig-Hallum。
Richard Shannon - Analyst
Richard Shannon - Analyst
Great. Thanks, Mark, and thanks, Scott and Frank, for let me ask a few questions here. I guess I'll ask the first one on STMicro. Certainly, a disappointment to see this delay, but obviously, a need for STMicro here. I guess my first question is, to what degree is the work that you've done with them on 200-millimeter will be useful and be leveraged to 300-millimeter?
很好。謝謝你,Mark,也謝謝Scott和Frank讓我在這裡問幾個問題。我想第一個問題先問STMicro。看到這次延遲當然令人失望,但顯然STMicro在這裡確實有需求。我的第一個問題是:你們與他們在200毫米上的工作,在多大程度上能對300毫米有所幫助並加以沿用?
Or to what degree do we have to kind of restart things? Frank, in his comments said something about not expecting a milestone payment this year, but next year. So it doesn't sound like it's necessarily two years, initial two years, but maybe you can characterize that somehow, please.
或者說,我們需要在多大程度上重新開始?Frank在評論中提到今年不預期會有里程碑款,但明年會有。所以聽起來不一定是最初那兩年(的時間表),但也許你可以幫我們描述一下,謝謝。
Scott Bibaud - President, Chief Executive Officer, Director
Scott Bibaud - President, Chief Executive Officer, Director
Yes. I think it's important to know that when we started working with STMicro, they had to learn a lot of things. They had to learn how to deposit MST using EPI and get that working really well and looking very good. And then the manufacturability efforts they've been going through and trying to figure out how to deposit it at faster speeds so that they can have higher throughput in production.
是的。我認為重要的是要知道,當我們開始與STMicro合作時,他們需要學習很多事情。他們必須學會如何使用EPI沉積MST,並把它做到運作良好、外觀與結果都非常好。接著是他們一直在進行的可製造性(manufacturability)工作,並試著找出如何以更快速度沉積,以便在量產中提高產出(throughput)。
All of that work is useful for going to 300-millimeter as well. So at this point, STMicro is an expert on depositing MST, analyzing the results, figuring out how to optimize throughput with that, manufacturability in general, I should say. On the other side, there's the integration work that has to happen with MST.
所有這些工作對於轉向300毫米同樣有用。因此到目前為止,STMicro已經是沉積MST、分析結果、並據此最佳化產出(更廣義地說是可製造性)的專家。另一方面,還有必須與MST一起完成的整合工作。
That's also work that kind of started fresh at the beginning of the contract, and we've done a number of different wafer iterations with them where they've simulated the MST and then run it and got the electrical results. And at this point, they're quite good at that as well. So I don't think it's all -- I mean, I should say, I think they have got a lot of learnings under their belt that will help them move to 300-millimeter relatively quickly and painlessly.
這部分的工作在合約一開始也算是從頭開始,而我們已與他們做了多輪不同的晶圓迭代:他們先模擬MST,接著實際跑製程並取得電性結果。到目前為止,他們在這方面也相當熟練。所以我不認為一切都得重來——我的意思是,我認為他們已累積了大量經驗,將有助於他們相對快速且順利地轉向300毫米。
Now there are some impediments to moving to 300-millimeter. They have to get -- they have to put MST on a 300-millimeter tool. In the past, they've had it installed on 200-millimeter tools. And so they have to obtain that, get it done and then tune that up and then be ready to start making wafers with it.
當然,轉向300毫米仍有一些障礙。他們必須——他們必須把MST導入到一台300毫米設備上。過去他們是安裝在200毫米設備上。因此他們需要取得那套設備、完成安裝,接著再調校,然後才能準備開始用它來製作晶圓。
And then there -- I'm sure they're making other changes to the VCD110 technology when they're moving to 300-millimeter, and there'll be some integration changes that have to happen, but nothing close to the amount that they're having to do when they started from scratch at the beginning. So yes, I'm hopeful that we can move pretty quickly.
此外——我相信他們在轉向300毫米時,也會對VCD110技術做其他變更,並且需要進行一些整合上的調整,但遠遠不會像一開始從零開始時需要做的那麼多。所以是的,我希望我們能推進得相當快。
Frank Laurencio - Chief Financial Officer
Frank Laurencio - Chief Financial Officer
Okay. But just to be clear, Frank's comments were about expecting the milestone payment next year. That sounds like a fairly high level of confidence in that statement. Is that accurate?
好的。但為了確認清楚,Frank的評論是指預期明年會收到里程碑款。這聽起來對該說法有相當高的信心。這樣理解正確嗎?
Scott Bibaud - President, Chief Executive Officer, Director
Scott Bibaud - President, Chief Executive Officer, Director
Well, I feel -- I mean, what I can tell you is that we have shown ST some performance levels that I think are -- would be very, very compelling for them to take to production next year in the 300. And so I think they're going to move as fast as they can to make that happen. And yes, I think it will. Yes. I hesitate to make any kind of a statement about when they will get into process qualification because I'm restricted on that.
嗯,我的感受是——我的意思是,我能告訴你的是:我們已向ST展示了一些我認為非常、非常有說服力的效能水準,足以讓他們在明年於300毫米導入量產。因此我認為他們會盡可能快地推動這件事發生。而且是的,我認為會。是的。我不太願意對他們何時進入製程認證(process qualification)做任何表述,因為我在這方面有所限制。
But I don't -- if they can get access to the 300-millimeter tool -- and by the way, we have 300-millimeter tools, and we've offered to them already that we can do the work of depositing on wafers until they have it ready. And if they can do all that quickly, then I think, yes, we have a chance of doing that relatively quickly.
但我不——如果他們能取得300毫米設備的使用權——順帶一提,我們有300毫米設備,而且我們已經向他們提出,在他們準備好之前,我們可以先代為在晶圓上進行沉積作業。如果他們能快速把這些都做完,那我認為,是的,我們有機會相對快速地完成。
Richard Shannon - Analyst
Richard Shannon - Analyst
Okay. Fair enough. Maybe another question related to STMicro, which is, as we have sort of expected in the years we've been covering you, getting to that first licensee who's committed to do it and perfecting it and taking production is obviously the really hard move here. And a lot of companies are risk averse and we'd rather see somebody else do that first.
好的。可以理解。也許再問一個與STMicro相關的問題:正如我們多年來追蹤你們所預期的,拿下第一家真正承諾導入、把技術做到完善並推進到量產的授權客戶,顯然是最困難的一步。而許多公司都偏好避險,寧可先看到別人先做成功。
To what degree have you had conversations in the two years since you announced this partnership with STMicro and move pretty -- what seemed like a pretty far down the road here with them so far. Have you had other conversations with potential engagements saying, as soon as you get that done with STMicro, we're willing to go forward.
在你們宣布與STMicro合作後的這兩年裡,且目前看起來你們與他們已經推進到相當後段的情況下,你們在多大程度上與其他潛在合作對象有過對話,對方表示「只要你們把STMicro這邊做成,我們就願意往前走」?
Scott Bibaud - President, Chief Executive Officer, Director
Scott Bibaud - President, Chief Executive Officer, Director
Yes. I think people don't say it quite as explicitly as that, Richard, but they say things that are similar to that all the time. And it's definitely true that since we started working with STM, people can see we're getting very close to the end. We've had others that have kind of joined in and said, yes, okay, we got to do this as well.
是的。Richard,人們不會把話說得那麼直接,但他們經常會說出類似的意思。而且確實,自從我們開始與STM合作以來,大家可以看出我們已非常接近終點。也有其他人陸續加入並表示:是的,好吧,我們也必須做這件事。
So you're talking about kind of the domino effect that I've been talking about for a long time. Once we get with one guy, we'll get with others. And we've seen real evidence of that in the past, yes.
所以你是在談我長期以來一直在說的那種骨牌效應。一旦我們跟某一家合作,就會跟其他家合作。而且我們過去確實看過這方面的實際證據,是的。
Richard Shannon - Analyst
Richard Shannon - Analyst
Okay. Fair enough. Scott, I would love for you to maybe restate and describe a little bit more about this dynamic with one of the transformative customers. I didn't catch the language you mentioned about two -- where did I put it here, two large-scale demos with two different business units and different applications. Maybe you can explain or restate that and explain a little bit more about what's going on.
好的。有道理。Scott,我希望你能把其中一位具變革性的客戶的這種互動關係,重新陳述並再多描述一點。我沒聽清你提到的那段話,關於兩個——我把它放哪了——兩個大規模 demo,分別在兩個不同的事業單位、不同的應用上。也許你可以再解釋或重述一下,並多說一點目前的情況。
Scott Bibaud - President, Chief Executive Officer, Director
Scott Bibaud - President, Chief Executive Officer, Director
Yes. So we I think in the call in February, I mentioned that we had two new customers who had put in the category of transformative. If they can get to production with us, it will be a very, very significant event. So one of them is doing a very large demo run, the biggest we've ever done, meaning more wafers, more different splits and things that they're trying to test out. And that's fantastic.
是的。所以我想在二月那次電話會議上,我提到我們有兩個新客戶被我們歸類為「具變革性」。如果他們能和我們一起走到量產(production),那將會是非常、非常重大的事件。其中一家正在做一個非常大型的 demo 試跑,是我們做過最大的一次,也就是更多的晶圓、更多不同的分割(splits)以及他們想測試的各種項目。這非常棒。
If they're doing a lot of wafers, what that means is they can get a lot of cycles of learning. So you take a certain subset of those wafers and you run some tests. And even maybe before you get -- you may not even have to wait until those wafers come out at the end before you start running new tests.
如果他們跑很多晶圓,代表他們可以獲得很多學習迭代的循環。你可以取其中一部分晶圓去做一些測試。甚至可能在——你甚至不一定要等到那些晶圓最後全部出來,才開始跑新的測試。
So if you have a big pile of wafers at your disposal, you can keep doing those and get more and more cycles of learning in a shorter period of time. And so that's what they're planning to do. So we're excited about that. And they're also doing the same type of thing with two different business units at the same time. So yes, both very exciting.
所以如果你手上有一大批可用的晶圓,你就能持續做這些事情,在更短時間內得到越來越多的學習迭代循環。這就是他們計畫要做的。所以我們對此很興奮。而且他們也同時在兩個不同的事業單位做同類型的事情。所以是的,兩者都非常令人振奮。
Richard Shannon - Analyst
Richard Shannon - Analyst
Okay. When do you expect I don't know, some sort of conclusion about how successful these runs have been. Maybe we'll hear in the next call or just take a little bit longer. I know some of these --
好的。你預期什麼時候會有某種結論,來判斷這些試跑有多成功?也許我們會在下一次電話會議聽到,還是需要再久一點?我知道其中一些--
Scott Bibaud - President, Chief Executive Officer, Director
Scott Bibaud - President, Chief Executive Officer, Director
I think it will take longer than the next call. We're in the -- we're doing the runs right now. We probably -- I think maybe we might see first results if everything goes really well by the end of the year. And then these things are frequently iterative. So we don't know if they'll get those first results say, okay, we got to do another one because we need to try something different.
我認為會比下一次電話會議更久。我們目前——我們正在進行這些試跑。我們大概——我想如果一切都非常順利,也許到年底會看到第一批結果。而且這些事情通常是反覆迭代的。所以我們也不知道他們拿到第一批結果後,會不會說:好,我們得再做一次,因為需要嘗試不同的做法。
But yes, I'm hopeful that they'll get something relatively quickly. And we've done -- it's not like we're just starting from fresh either. We've been working with these guys for some time on the TCAD level. And so they've got simulations, and we think we're guiding them in a path that will make them successful pretty quickly.
不過是的,我希望他們能相對快地得到一些結果。而且我們——也不是說我們完全從零開始。我們已經在 TCAD 層級和這些人合作了一段時間。因此他們已有模擬結果,而我們也認為我們正在引導他們走一條能夠相當快取得成功的路徑。
Frank Laurencio - Chief Financial Officer
Frank Laurencio - Chief Financial Officer
Okay, fair enough (inaudible)
好的,可以理解(聽不清楚)
Scott Bibaud - President, Chief Executive Officer, Director
Scott Bibaud - President, Chief Executive Officer, Director
Yes, the other transformative customer you asked about also with them, they also are -- they're working on multiple wafer runs in multiple different application areas. So definitely different than the first. It's an entirely different area that they're in.
是的,你問到的另一位具變革性的客戶也是——他們也在多個不同的應用領域進行多次晶圓試跑。所以確實和第一家不同。他們所處的是完全不同的領域。
And we've proposed a number of things they could do with MST, and so they're trying out a few of them. And so that's pretty exciting as well, and we're giving them a lot of support.
我們提出了許多他們可以用 MST 來做的事情,所以他們正在試幾個方案。因此這也相當令人興奮,而我們也給了他們很多支援。
Richard Shannon - Analyst
Richard Shannon - Analyst
Okay. Sounds great. We look forward to more updates there. Scott, let me ask about something I think we talked on the last call about this unnamed equipment vendor partner that you've been working with. And I think specifically you mentioned, I think it's related to JDA1, where they have been helping you there.
好的。聽起來很棒。我們期待那邊有更多更新。Scott,我想問一件事:我記得我們在上一次電話會議談到你們正在合作的一家未具名設備供應商夥伴。而且我想你特別提到,應該是和 JDA1 有關,他們在那裡一直在協助你們。
Maybe just talk a little bit more broadly about what kind of engagements you've been working on with them. And I'm not sure if -- I don't think I asked this last quarter of you, but what kind of application areas are we talking about here? Is this leading edge, wireless or RF or just any way you can characterize where they're focused with you?
能否更廣泛地談談你們和他們正在進行哪些類型的合作?我不確定——我想我上季沒有問你這個,但我們談的是哪些應用領域?這是先進製程、無線或 RF,還是你能用任何方式描述他們與你們合作的重點方向?
Scott Bibaud - President, Chief Executive Officer, Director
Scott Bibaud - President, Chief Executive Officer, Director
Okay. So a number of questions there, which I'll be happy to dive into. So first of all, the applications areas. We announced a strategic partnership with them for gate-all-around devices. And so that's where ostensibly, the focus was supposed to be.
好的。你問了好幾個問題,我很樂意深入說明。首先是應用領域。我們宣布與他們建立針對 GAA(gate-all-around,環繞閘極)元件的策略夥伴關係。所以表面上,原本的重點應該是在那裡。
But now that we're getting deeply involved with them, it's natural that we're kind of expanding into other areas because once you start talking to some about trying to work on a customer and you need help, you can pull them in to help you in a number of different ways. So -- but the strategic collaboration is around gate-all-around, okay? So I think the first part of your question was how is that going? Is that right?
但現在我們和他們更深度地合作後,很自然地我們會擴展到其他領域,因為一旦你開始和某些人討論如何服務某個客戶、而你需要協助時,你就可以把他們拉進來,以多種不同方式協助你。所以——不過策略合作的核心是圍繞 GAA,好嗎?所以我想你問題的第一部分是:進展如何?是這樣嗎?
Richard Shannon - Analyst
Richard Shannon - Analyst
Yes, yes. And maybe describe the breadth of the engagements in anyway.
是的,是的。也請你用任何方式描述一下合作的廣度。
Scott Bibaud - President, Chief Executive Officer, Director
Scott Bibaud - President, Chief Executive Officer, Director
Yes. So shortly after our announcement, we started having management level meetings with them to talk about exactly how do we want to try to focus on addressing this segment. We've done a lot of work in that area. So it isn't like we're starting from ground zero. As a matter of fact, we've done some work with them.
是的。所以在我們宣布之後不久,我們就開始和他們進行管理層級的會議,討論我們究竟要如何聚焦來切入並解決這個市場區隔。我們在那個領域已經做了很多工作。所以並不是從零開始。事實上,我們也和他們做過一些工作。
They've also done a lot of work. And so we defined a number of different areas where we're going to work together to develop the test data that's necessary to really convince customers to use this and to take it to production. And we're doing a lot of work with them since then. As a matter of fact, we have weekly meetings and constant updates to what we're working on and how the progress there is going.
他們也做了很多工作。因此我們界定了若干不同的合作領域,將共同開發必要的測試數據,以真正說服客戶使用這項技術並推進到量產。從那之後我們就和他們做了大量工作。事實上,我們每週都有會議,並持續更新我們正在做的事情以及進度如何。
Separately, we're also talking with their executive management about kind of customer relationship type of engagements, like who do we need to talk to at what customers, how can we jointly go in there and offer a better solution together than we could separately. And so those discussions are underway. We've had a few meetings with customers. I hope to have a lot more as we come out of the kind of summer slow season.
另外,我們也在和他們的高階管理團隊討論一些偏向客戶關係型的合作,例如:在各個客戶那裡我們需要和誰對談、我們如何能夠聯合拜訪並提出一個比各自單獨行動更好的整體解決方案。所以這些討論正在進行中。我們已經和客戶開過幾次會。我希望在度過夏季相對淡季之後,能有更多這類會議。
Richard Shannon - Analyst
Richard Shannon - Analyst
Okay. Fair enough. Let me ask one question to Frank, and I'll jump out of line here. Frank, I think you mentioned for your OpEx guidance for the year, keeping the same, but kind of angling towards the low end here, yet you're talking about a number of hires here.
好的。有道理。我想問 Frank 一個問題,然後我就先不佔用隊伍了。Frank,我記得你提到今年的 OpEx 指引維持不變,但有點偏向區間低端,不過你同時又在談到要招募一些人。
Maybe, a, can you kind of describe some of the needs here from an OpEx point of view, especially on the, I guess, more on the engineering side, what do you need there? And then does this extrapolate into a noticeable or meaningful growth as we look into calendar '26?
也許,呃,你能否從 OpEx 的角度描述一下這裡的一些需求,特別是我想更偏工程端,你們那邊需要什麼?另外,當我們展望 2026 年曆年時,這是否會外推成為明顯或有意義的成長?
Frank Laurencio - Chief Financial Officer
Frank Laurencio - Chief Financial Officer
Yes. I think that the reason I'm kind of keeping the guidance where it was, but also talking about new hires is really just on the timing we're into the second half of the year. Obviously, when our VP of Marketing left, that wasn't anticipated, and we had planned on adding an additional headcount in sales and marketing. So now we're sort of still doing that and backfilling that person who left.
是的。我之所以一方面把指引維持在原來的位置、同時又談到新招募,主要只是因為時點問題——我們已經進入下半年了。顯然,當我們的行銷副總離職時,這並非預期之內,而我們原本就計畫在銷售與行銷再增加一個編制。所以現在我們等於一方面仍在做那件事,同時也要補上離職的那個人。
And so those are two hires that were kind of planned from the beginning, and now we've sort of spent less in the first part of the year, and we'll kind of trend back to that. In engineering, we're -- this is just consistent with the amount of customer activity that we have. Some of the folks that are supporting our customers I think particularly in the advanced nodes and DRAM are -- the teams are a little bit lacking in depth on the bench.
因此這兩個招募其實從一開始就有規劃;而我們在上半年花得比較少,下半年就會大致回到那個趨勢。在工程方面,我們——這只是與我們目前的客戶活動量一致。我認為支援客戶的一些同仁,特別是在先進節點與 DRAM 上——團隊在後備深度上有點不足。
And so we just -- we're kind of overwhelmed with the work that we need to do, and so we need to add there. But I wouldn't read into that to say that we're going to -- you can draw a line there and that we'd continue to grow in years going forward. I think this is really just catching up to the demand. And on the sales and marketing side, we're really backfilling on positions that we used to have full if you sort of turn the clock back a year ago.
所以我們——目前需要做的工作量有點讓我們應接不暇,因此需要在那裡增補人力。但我不會把這解讀為我們將——你可以在那裡畫一條線,然後認為我們未來幾年會持續成長。我認為這其實只是追上需求。而在銷售與行銷端,我們基本上是在把以前有滿編的職位補回來——如果你把時間倒回到一年前的話。
Richard Shannon - Analyst
Richard Shannon - Analyst
Got it. Okay. That is helpful, Frank, and that's all for me, guys. Thank you.
了解。好的。這很有幫助,Frank,我這邊就到這裡,各位。謝謝。
Scott Bibaud - President, Chief Executive Officer, Director
Scott Bibaud - President, Chief Executive Officer, Director
Thanks Richard.
謝謝你,Richard。
Mike Bishop - Investor Relations
Mike Bishop - Investor Relations
Thank you, Richard. And some questions coming in on the Q&A chat here, Scott and Frank. The first one is, do you anticipate other existing customers moving on from current 200 work and instead focusing on 300 millimeter?
謝謝你,Richard。Scott 和 Frank,這邊 Q&A 聊天也有一些問題進來。第一個是:你們是否預期其他既有客戶會從目前的 200(毫米)工作轉移,改為聚焦 300 毫米?
Scott Bibaud - President, Chief Executive Officer, Director
Scott Bibaud - President, Chief Executive Officer, Director
Yes. I don't -- I wouldn't say it's necessarily an industry-wide trend. It's not a bad trend for us. I think the setback with ST is primarily because we had initially started doing work in 200 and are going to transition to 300.
是的。我不——我不會說這必然是全產業的趨勢。這對我們來說也不是壞趨勢。我認為 ST 的挫折主要是因為我們一開始是在 200 上做工作,現在要轉到 300。
But for -- I would say for the majority of our customers today, we start working on 300 from the beginning. Our technology works perfectly fine in both of them. So -- and yes, I would say the threat that some of our others move from 200 to 300 is relatively low.
但就——我會說就我們目前大多數客戶而言,我們從一開始就是在 300 上展開工作。我們的技術在兩者上都能運作得很好。所以——而且是的,我會說我們其他一些客戶從 200 轉到 300 的風險相對較低。
Mike Bishop - Investor Relations
Mike Bishop - Investor Relations
And you mentioned to Richard a little bit about the porting of MST to 300 millimeters at ST. Is that a heavy lift to move? Or can you talk a little bit more about -- or expand on what you said to Richard about moving?
你也對 Richard 稍微提到 ST 將 MST 移植到 300 毫米的事。這個轉移的工程量很大嗎?或者你能否再多談一點——或延伸你對 Richard 說的關於轉移的內容?
Scott Bibaud - President, Chief Executive Officer, Director
Scott Bibaud - President, Chief Executive Officer, Director
Yes. I don't think -- so as I always explain to Richard, there's two pieces to the move. One piece is changing -- is moving the EPI side, which I really don't think is a heavy lift from an engineering perspective. Now the challenge there is that you need to have a tool that you can convert over to run MST.
是的。我不認為——所以我一向跟 Richard 解釋,這個轉移有兩個部分。其中一部分是改變——也就是把 EPI 端移過去;從工程角度我真的不覺得這是很大的工程。不過那裡的挑戰在於,你需要有一台工具機能夠轉換過來以跑 MST。
And so for some people who don't have a tool that can be an impediment, I'm not going to comment on ST's capability, but they're a very big company with lots of resources. And so if they could get a 300-millimeter tool, they could convert it over very quickly to be able to run MST, and their epi engineers are already fully trained. On the other side, the integration, again, I don't think it's a heavy lift.
因此對某些沒有可用工具機的人來說,這可能會成為阻礙;我不評論 ST 的能力,但他們是一家非常大的公司、資源很多。所以如果他們能取得一台 300 毫米的工具機,他們就能很快把它轉換成可跑 MST,而他們的外延(epi)工程師也都已經受過完整訓練。另一方面,整合端同樣地,我也不認為是很大的工程。
They understand MST. They know how it works. They know how to integrate it into their devices. The only question there is whether they're planning some other changes to 300-millimeter that we need to make some change to MST to react to. I'm not sure what's happening there. This is kind of all new information, and we will -- but I don't -- on balance, I would say these guys understand what they need to do and there's no major impediments.
他們了解 MST。他們知道它如何運作。他們知道如何把它整合到他們的元件中。唯一的問題是,他們是否在 300 毫米上還規劃了其他變更,導致我們需要對 MST 做一些調整來因應。我不確定那邊的情況。這些算是全新的資訊,而我們會——但整體而言,我會說這些人知道自己需要做什麼,沒有重大阻礙。
Mike Bishop - Investor Relations
Mike Bishop - Investor Relations
Great. Thank you. And can you provide -- and you touched on this a little bit with Richard, but can you provide an update on the collaboration with the equipment partner that was announced last quarter? And are you seeing synergies from the partnerships and specifically in gate-all-around?
很好。謝謝。另外你能否提供——你剛才也對 Richard 稍微提到,但你能否更新一下上季宣布的那家設備合作夥伴的合作進展?以及你們是否從合作關係中看到綜效,特別是在環繞式閘極(gate-all-around)方面?
Scott Bibaud - President, Chief Executive Officer, Director
Scott Bibaud - President, Chief Executive Officer, Director
Yes. I mean we're already getting some benefit from -- so first thing that we did with this partner after the announcement was to get together and start thinking about what customers do we want to go after and what are the key applications that need that the customers are looking for and how can MST help in those?
是的。我的意思是,我們已經開始獲得一些好處——所以我們在宣布之後與這個夥伴做的第一件事,就是聚在一起開始思考:我們想要爭取哪些客戶?客戶在找的關鍵應用是什麼?MST 在那些應用中能如何提供幫助?
We did identify a prioritized list of application areas that we wanted to address, some of which, I would say, the most important ones we are already working on, but then there are some others they raised that we hadn't really started too much work on. The good news is we immediately set out to create an engineering plan where we would do the testing and process development to be able to test those things out and give the data to the customer so we can win the customer.
我們確實找出了一份優先順序的應用領域清單,想要去解決;其中一些我會說最重要的,我們已經在做了,但也有一些是他們提出、而我們之前其實還沒有投入太多工作的。好消息是,我們立刻著手制定一個工程計畫,進行測試與製程開發,讓我們能把那些項目測出來並把數據提供給客戶,從而贏得客戶。
So I think that's been something we've already done quite a bit of work on, and we'll continue to -- that's going to be the long-term trend of how a partnership works here. And on the other side, we need to do more on the business side. I think the business side is lagging a little bit the technical development, which is natural because we need to have the kind of the data to do a marketing pitch to a customer, and we're working on that together. But I think very soon, we'll start to do a lot more at the kind of senior level customer relationship.
所以我認為這是我們已經做了相當多工作的部分,而且我們也會持續——這將會是這種合作夥伴關係長期運作的方式。另一方面,我們在商務端還需要做更多。我認為商務端相較於技術開發稍微落後一些,這很自然,因為我們需要有那種數據,才能對客戶做行銷提案,而我們正在一起推進。但我認為很快地,我們就會在更高層級的客戶關係上做更多事情。
Mike Bishop - Investor Relations
Mike Bishop - Investor Relations
Great. Thank you. And given the explosive demand for data centers, what's the market around or the market demand for MST-SPX? And what are Atomera's plans to capitalize on the trend?
很好。謝謝。另外,考量到資料中心需求爆發式成長,MST-SPX 的市場規模或市場需求如何?Atomera 有哪些計畫來把握這個趨勢?
Scott Bibaud - President, Chief Executive Officer, Director
Scott Bibaud - President, Chief Executive Officer, Director
Yes. I mean everything we're doing in power, which is MST-SPX and gallium nitride -- all the gallium nitride power work we're doing is definitely well targeted at the data center. And both of those technologies will help to seriously reduce power consumption, make our customers' power products much more efficient, and we think that's a big opportunity.
是的。我的意思是,我們在電源領域所做的一切,也就是 MST-SPX 與氮化鎵——我們所有的氮化鎵電源相關工作,確實都非常精準地鎖定資料中心。而這兩項技術都將有助於大幅降低耗電量,讓我們客戶的電源產品效率大幅提升,我們認為這是一個很大的機會。
We also -- I may have mentioned this on an earlier phone call, but we have we have some early-stage work on 48-volt power devices, which is what the new AI data centers are moving to as the standard for the rack power supply voltage, and we think we might be able to provide some real benefits to the trench that are used to make those type of devices. And so we're talking to a number of customers about that now as well.
另外——我可能在先前的電話會議中提過,但我們在 48 伏特電源元件方面也有一些早期階段的工作;這正是新的 AI 資料中心正朝向採用、作為機櫃電源供應器電壓標準的方向。我們認為,我們或許能在用來製造這類元件的溝槽(trench)方面提供一些實質效益。因此,我們目前也正在與多家客戶就此進行洽談。
Mike Bishop - Investor Relations
Mike Bishop - Investor Relations
Great. Thank you. And here's another question that's -- they'd like an update on the progress of contract discussions with memory customers for DRAM and high-bandwidth memory. And any recent patents seem to suggest you're proposing a new memory architecture, interconnect architecture. So he asked if he's curious if this is part of a process to create new IP for memory device structures beyond MST.
很好。謝謝。這裡還有另一個問題——他們希望更新與記憶體客戶就 DRAM 與高頻寬記憶體的合約討論進展。另外,一些近期專利似乎顯示你們正在提出新的記憶體架構、互連架構。所以他想知道,這是否是為了在 MST 之外,為記憶體元件結構建立新 IP 的一部分流程。
Scott Bibaud - President, Chief Executive Officer, Director
Scott Bibaud - President, Chief Executive Officer, Director
So first part of the question about the contract. So we won't comment on contract discussions until we actually have a contract close. So I'll probably pass on that part of the question. But the second part, yes, we're constantly looking at important market needs and then trying to figure out how to create IP to take advantage of those needs.
先回答關於合約的第一部分。在我們真正完成合約簽署之前,我們不會評論合約討論。所以這部分我可能先略過。但第二部分,是的,我們一直在觀察重要的市場需求,並嘗試找出如何建立 IP 來把握這些需求。
So if we figure out a customer has some demand and MST can help to support that. The first thing we do internally is we do some development efforts and try to come up with a solution and then we patent that solution, and then we bring it out to the market and start pitching it to customers.
因此,如果我們發現某位客戶有需求,而 MST 能夠協助支援該需求,我們內部首先會進行一些開發工作,嘗試提出解決方案,接著為該解決方案申請專利,然後把它推向市場並開始向客戶推介。
And so if you really go in and analyze our data, you can see some of the ways that we've looked at different markets. In this case, you're asking about the memory market. We have been offering solutions in the memory market for Sense amps for several years. We also have some of the same technologies that are advantageous for gate-all-around.
所以如果你真的深入分析我們的資料,你可以看到我們如何在不同市場中進行探索。在這個案例中,你問的是記憶體市場。我們在記憶體市場針對感測放大器(Sense amps)提供解決方案已經有好幾年了。我們也有一些相同的技術,對環繞閘極(gate-all-around)是有利的。
We will also be advantageous for some of the newest DRAM nodes that are coming out. We also have some technology around new architectures that are either enabled by MST or are just great ideas in general that we may have patented. And all of those are things that we'll be out marketing to the customers in the future. I don't know if you want to add anything to that, Frank, but --
我們也將對即將推出的一些最新 DRAM 製程節點帶來優勢。此外,我們也有一些關於新架構的技術,這些架構要嘛是由 MST 所促成,要嘛本身就是很好的想法,我們可能已經為其申請了專利。而這些都是我們未來會對客戶進行行銷推廣的內容。Frank,你是否想補充什麼,還是--
Frank Laurencio - Chief Financial Officer
Frank Laurencio - Chief Financial Officer
No, no, I think that you've covered it. I mean the new -- there are a number of recent patents, both on specifically MST-enabled solutions for DRAM that we've been talking to customers about for a while. And there are a set of new technologies that we are -- that we have patented.
不,不,我想你已經涵蓋到了。我的意思是,近期有不少專利,既包括我們已與客戶討論一段時間、特別是由 MST 促成的 DRAM 解決方案;也包括一系列我們已申請專利的新技術。
And those do offer potential other revenue streams in the future beyond just sort of the MST film, but that's very early days. And it's important in those kinds of technologies to get the patents completely filed and issued before we'd be ready to talk to customers because in our business model, what's the real kind of core IP for us is the MST film.
而這些確實可能在未來提供除 MST 薄膜之外的其他潛在營收來源,但目前仍非常早期。而在這類技術上,在我們準備好與客戶討論之前,必須先把專利完整提交並取得核發,因為在我們的商業模式中,真正的核心 IP 是 MST 薄膜。
But when we start getting out into other kind of architectural type patents, you really need to have those completely filed and issued before you talk to customers. So the person asking the question is right to sort of focus on the patents. I think that's important, but that's more of a future activity.
但當我們開始延伸到其他類型的架構型專利時,你真的需要在與客戶談之前,先把那些專利完整提交並取得核發。所以提問者把焦點放在專利上是對的。我認為那很重要,但那更偏向未來的活動。
Mike Bishop - Investor Relations
Mike Bishop - Investor Relations
Okay. Thanks. Another question. Does becoming an official member of the NSTC increase the possibility of receiving CHIPS Act subsidies?
好的。謝謝。另一個問題。成為 NSTC 的正式會員,是否會提高獲得《CHIPS 法案》補助的可能性?
Frank Laurencio - Chief Financial Officer
Frank Laurencio - Chief Financial Officer
I think the answer is yes, but one of the primary reasons for it is not necessarily the CHIPS Act directly in terms of getting direct funding on it. One of the issues that you face in our business is when we had TSI Semiconductor, it was great because we could run a lot of test chips, but it was on a very old technology, 180 nanometers.
我想答案是會,但主要原因不一定是直接因為《CHIPS 法案》本身、也不一定是為了直接取得資金。我們這個產業面臨的一個問題是,當我們有 TSI Semiconductor 時很棒,因為我們可以跑很多測試晶片,但那是非常舊的技術,180 奈米。
Now that we see that we're working with a lot more kind of advanced transistor structures, gate-all-around, DRAM, et cetera, one of the biggest challenges that we have is finding places where we can affordably test MST on those kinds of structures. And historically, there have been very few labs and access to them is extremely expensive.
現在我們看到自己正在處理更多先進的電晶體結構、環繞閘極(gate-all-around)、DRAM 等等,我們最大的挑戰之一,是找到能以可負擔成本在這些結構上測試 MST 的地方。而過去可用的實驗室非常少,且取得使用權的成本極高。
With NSTC and particularly in the current phase of the CHIPS Act, which is more around R&D and prototyping of new materials and new devices, our hope is that we will get access to more testing and metrology that's required to test MST on those kind of structures.
透過 NSTC,特別是在《CHIPS 法案》目前這個更聚焦於研發與新材料、新元件原型製作的階段,我們希望能取得更多測試與量測(metrology)資源,以便在這類結構上測試 MST。
That being said, it also puts you much more in the conversation of where -- it does give you a look at where there are funding opportunities coming up that we could apply for. So I do think it increases the chances of getting CHIPS Act subsidy. But I think indirectly, the ability to get access to prototyping and those kinds of services is almost more important.
話雖如此,這也會讓你更能參與相關討論——也確實能讓你看到有哪些即將出現的資金機會可供我們申請。所以我確實認為這會提高獲得《CHIPS 法案》補助的機率。但我認為更重要的是,能夠取得原型製作與這類服務的能力,幾乎更為關鍵。
Mike Bishop - Investor Relations
Mike Bishop - Investor Relations
All right. Well, thanks, Frank. Scott, at this point, we'll turn the call back to you for closing comments.
好的。那麼謝謝你,Frank。Scott,接下來我們把電話交回給你做結語。
Scott Bibaud - President, Chief Executive Officer, Director
Scott Bibaud - President, Chief Executive Officer, Director
All right. Well, thanks, Mike, and thank you all for joining us to hear the progress being made at Atomera. Please continue to look for our news, articles and blog posts, which are available along with investor alerts on our website, atomera.com. Should you have additional questions, please contact Mike Bishop, who'll be happy to follow up. Thanks again for your support, and we look forward to our next update call.
好的。謝謝你,Mike,也謝謝各位加入我們,一起了解 Atomera 所取得的進展。請持續關注我們的新聞、文章與部落格貼文;這些內容以及投資人提醒都可在我們的網站 atomera.com 上取得。如有其他問題,請聯絡 Mike Bishop,他很樂意後續跟進。再次感謝各位的支持,我們期待下一次的更新電話會議。
Mike Bishop - Investor Relations
Mike Bishop - Investor Relations
Thank you. This concludes the Atomera conference call.
謝謝。Atomera 電話會議到此結束。